Jakefalcon Posted July 20, 2017 Report Share Posted July 20, 2017 Someone gave me an avic f90bt missing the GPS antenna and microphone, they didn't know much about it. I wired it to a 12v plug red and yellow to one side and black to the other, it seems functional however the System settings option logo and some others are greyed out and unaccessible. Is that normal? I'd like to make sure it is fully functional and without problems plus do any software updates before I spend the money on accessories and the time installing it into my car. Any suggestions would be greatly appreciated, thanks! Quote Link to post Share on other sites
SpecialtyGreg Posted July 21, 2017 Report Share Posted July 21, 2017 You might be able to ground the green wire and see the greyed out settings. If not you may have to move a pin in the harness and then ground the green wire. Quote Link to post Share on other sites
Jakefalcon Posted July 22, 2017 Author Report Share Posted July 22, 2017 Thanks that worked! It appears as though the bypass has been done, the green wire is connected to the yellow/black wire and the harnesses run into each other, does that sound right? How would I connect that during actual installation, right to the ground? Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.