Jump to content
AVIC411.com

New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Releastechnologye


Recommended Posts

  • Replies 381
  • Created
  • Last Reply

Top Posters In This Topic

How about F920BT?

Official update info:

2017 European Map Update for Pioneer MY09/10 - AVIC-F10BT, F20BT, F920BT, F9210BT, F9220BT - Catalog # T1000-25815

2017 European Map Update for Pioneer MY11/12 - AVIC-F30BT, F930BT, F9310BT, F40BT, F940BT, F840BT, F8430BT - Catalog # T1000-25817

 

Godzilla version is the second one. First one is here but i think nobody has tested it.

Link to post
Share on other sites
How about F920BT?

Official update info:

2017 European Map Update for Pioneer MY09/10 - AVIC-F10BT, F20BT, F920BT, F9210BT, F9220BT - Catalog # T1000-25815

2017 European Map Update for Pioneer MY11/12 - AVIC-F30BT, F930BT, F9310BT, F40BT, F940BT, F840BT, F8430BT - Catalog # T1000-25817

 

Godzilla version is the second one. First one is here but i think nobody has tested it.

 

At least one person was successful installing godzilla's version on a F20bt by editing the CardInfo.CIF file. He posted the file. I think you could also use the CardInfo from a previous version that worked for your unit. IIRC, the 2015 maps had CardInfo files posted.

Link to post
Share on other sites

today i tried to update my F920BT.

Everything went fine until it came to 93% and 2 minutes left.

A message came up saying: wrong SD card. please insert correct SD card.

 

I have also updated my AviÑ F20BT! I had problems on 98%, "set the correct SD"

I solved the problem, copied the modified file RenewallFlib.dll in the update 2017!

 

THX to Godzilla and RonS!

 

Michael_81

Where did you get the modified file RenewallFlib.dll?

Did you make the changes mentioned in the 2015 thread?

Link to post
Share on other sites

today i tried to update my F920BT.

Everything went fine until it came to 93% and 2 minutes left.

A message came up saying: wrong SD card. please insert correct SD card.

 

 

Michael_81

Where did you get the modified file RenewallFlib.dll?

Did you make the changes mentioned in the 2015 thread?

You don't need a different RenewallFlib.dll.  If you got that far, the ShortFuse hack succeeded.  These "Wrong SD" errors are caused because something is wrong with your map installation files.

 

I can think of two likely causes.

  • The zip password incorrectly entered when extracting godzilla's files. . If you don't surround it with single quotes (') some of the files will not be extracted and will be missing. IDK why he planted that bomb in there, but it just shows people aren't very good at following detailed instructions.
  • Some people replaced or modified RenewallFlib.dll on the installation SD. Nowhere in the detailed instructions does it say to do that.

 

People, don't modify any files on the Map Update SD - with the possible exception of CardInfo.CIF. If you modify files on the SD, the CRC won't match the original files and the installation will fail.  Go back to the files from the original (godzilla) zip and extract them. Also be sure to surround his password with single quotes. Then start the installation over.

Link to post
Share on other sites
Thanks RonS!

 

I've done all this:

Unpacked 2017 Update with "Single Quotes"

then as Psydon wrote:

 

edited CARDINFO.CIF.

 

OE9R75LQ2MJ2X72EUR

 

and replace it with

 

X07EURX27EURX30EUR

 

Then save CARDINFO.CIF and replace the update to SD card.

(I already provide edited CARDINFO.CIF, so you can simply overwrite it)

 

Then I used TestMode to get RenewalIFLib.dll from HU to edit it.

I copied from the following location \ USER \ PRG0 \ APL

Then it worked on PC with HxD.exe and made the following changes:

 

Replaces all (hex) 0350A0E3 with 0050A0E3.

 

Saved the file, copied to SD card, then copied to HU copied to:

\ USER \ PRG0 \ APL

and

\ USER \ PRG1 \ APL

 

Booted SD Card with 2017 update, then entered for update password: PASSWORDPASSWORD

 

At 98% received the message "Wrong SD", I repeated 2017 update-the same result !!!

Then I tried to write the files to another SD, the result is the same!

Next, I chose to SD 2017 Update\ UPDATE \ USER \ PRG \ APL  to replace RenewalIFLib.dll with the modified RenewalIFLib.dll.

Then everything works!!!

 

 

seafarer

Edit RenewalIFLib.dll in HxD.exe

Replaces all (hex) 0350A0E3 with 0050A0E3

Try again, as RonS writes, again unpack 2017 Update...

 

I am sorry for my English

Link to post
Share on other sites

 

Thanks RonS!
 
I've done all this:
Unpacked 2017 Update with "Single Quotes"
then as Psydon wrote:
 
edited CARDINFO.CIF.
 
OE9R75LQ2MJ2X72EUR
 
and replace it with
 
X07EURX27EURX30EUR
 
Then save CARDINFO.CIF and replace the update to SD card.
(I already provide edited CARDINFO.CIF, so you can simply overwrite it)
 
Then I used TestMode to get RenewalIFLib.dll from HU to edit it.
I copied from the following location \ USER \ PRG0 \ APL
Then it worked on PC with HxD.exe and made the following changes:
 
Replaces all (hex) 0350A0E3 with 0050A0E3.
 
Saved the file, copied to SD card, then copied to HU copied to:
\ USER \ PRG0 \ APL
and
\ USER \ PRG1 \ APL
 
Booted SD Card with 2017 update, then entered for update password: PASSWORDPASSWORD
 
At 98% received the message "Wrong SD", I repeated 2017 update-the same result !!!
Then I tried to write the files to another SD, the result is the same!
Next, I chose to SD 2017 Update\ UPDATE \ USER \ PRG \ APL  to replace RenewalIFLib.dll with the modified RenewalIFLib.dll.
Then everything works!!!
 
 
seafarer
Edit RenewalIFLib.dll in HxD.exe
Replaces all (hex) 0350A0E3 with 0050A0E3
Try again, as RonS writes, again unpack 2017 Update...
 
I am sorry for my English

 

 

Hallo Michael_81,

 

 

Bisher haben alle Versuche an verschiedenen Stellen zum Abbruch wegen falscher SD-Card geführt.

Selbst meine alte SD-Card mit dem 2015 Update bleibt mittendrin hängen.

Ich versuche jetzt, deinen Ablauf Schritt für Schritt nach zu machen.

Im Moment weiß ich nicht, was die Abkürzung HU bedeutet.

 

Gruß,

seafarer

Link to post
Share on other sites
  • Alexei Navalny changed the title to New Release F20BT F30BT F40Bt F920BT F930BT F840BT Etc 2017 Releastechnologye
  • Alexei Navalny unpinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...