Jefe2323 Posted June 4, 2018 Report Share Posted June 4, 2018 (edited) Hey all, I've got a z110bt and I've been able to update in the past without any issues. For some reason, I cannot get this 2017 update to work. I can run the shortfuse script but can't get the maps to install. I get the "Wrong SD card. Install correct SD card" error before even getting the chance to put in a password. I've tried several things: - Full format(not quick format) 2 different 8GB cards (used in previous updates) for FAT 32 with default config and 32k. I tried 16k and it wouldn't let it finish. - I've tried both the cardinfo.cif from the original zip as well as the specified z110 file that was also linked to this thread. Can anyone lend some insight into this issue? Thank you in advance! Edited June 4, 2018 by Jefe2323 Edit: I've re-formatted at 16k and now get the "An error occurred, update failed". It will also show the message "insert SD card" Quote Link to post Share on other sites
Jefe2323 Posted June 5, 2018 Report Share Posted June 5, 2018 On 6/3/2018 at 6:19 PM, Jefe2323 said: Hey all, I've got a z110bt and I've been able to update in the past without any issues. For some reason, I cannot get this 2017 update to work. I can run the shortfuse script but can't get the maps to install. I get the "Wrong SD card. Install correct SD card" error before even getting the chance to put in a password. I've tried several things: - Full format(not quick format) 2 different 8GB cards (used in previous updates) for FAT 32 with default config and 32k. I tried 16k and it wouldn't let it finish. - I've tried both the cardinfo.cif from the original zip as well as the specified z110 file that was also linked to this thread. Can anyone lend some insight into this issue? Thank you in advance! I can also enter TESTMODE and was able to copy over old files from USER. I'm just not able to update to new maps no matter what I've tried. Quote Link to post Share on other sites
Shane H Posted June 17, 2018 Report Share Posted June 17, 2018 Hello, I have Pioneer_T1000-25818.zip but can't find the proper password. And it isn't "PASSWORDPASSWORD" . Could I please have the right one? Thank you. I do have ShortFuseScript.zip and would be good to go. Found what I was looking for, thank you. I was missing the other password. Updating as I type with 18 minutes to go. Thank you RonS Quote Link to post Share on other sites
Alexei Navalny Posted June 17, 2018 Author Report Share Posted June 17, 2018 9 hours ago, Shane H said: Hello, I have Pioneer_T1000-25818.zip but can't find the proper password. And it isn't "PASSWORDPASSWORD" . Could I please have the right one? Thank you. I do have ShortFuseScript.zip and would be good to go. Quote Link to post Share on other sites
Shane H Posted June 20, 2018 Report Share Posted June 20, 2018 RonS, I used the "Easy" method, everything went smooth. But now Ipod wont work. The menu changed, I switch the CARDINFO with Z110Z120X920CARDINFO I have the 120BT. What did I do wrong? I'm going outside right now. It worked fine, cable is good. Any suggestions would be appreciated. Thanx Quote Link to post Share on other sites
Alexei Navalny Posted June 20, 2018 Author Report Share Posted June 20, 2018 58 minutes ago, Shane H said: RonS, I used the "Easy" method, everything went smooth. But now Ipod wont work. The menu changed, I switch the CARDINFO with Z110Z120X920CARDINFO I have the 120BT. What did I do wrong? I'm going outside right now. It worked fine, cable is good. Any suggestions would be appreciated. Thanx What do you mean? how is your iPod connected? Did you try AV System Settings/App Connection? Quote Link to post Share on other sites
Shane H Posted June 20, 2018 Report Share Posted June 20, 2018 I was in a hurry. Ipod nano connected with the usb/av cable. In the first pic only the settings and eq buttons work. Quote Link to post Share on other sites
Alexei Navalny Posted June 21, 2018 Author Report Share Posted June 21, 2018 15 hours ago, Shane H said: I was in a hurry. Ipod nano connected with the usb/av cable. In the first pic only the settings and eq buttons work. I never used App Mode - didn't even know it worked with a nano. I can only suggest doing a hard reset by disconnecting the car battery for a couple minutes. This often cures odd behavior after a firmware update. Quote Link to post Share on other sites
Shane H Posted July 1, 2018 Report Share Posted July 1, 2018 I never used app mode either. The selection is either wired or Bluetooth no off. I am going to disconnect the battery now since I can't find the radio fuse on the Hummer. Just pulled the radio fuse, it was powerless, reinstalled fuse and no change. The ipod function goes into app mode. I'm not 100% sure but if I remember right App mode was always greyed out before I did the update. Quote Link to post Share on other sites
wisehumanity Posted July 7, 2018 Report Share Posted July 7, 2018 Would someone mind pointing me to the update to 4.6 or 5.1 so I can get lightning support? I have z120bt if that is pertinent. Quote Link to post Share on other sites
BigCurt327 Posted July 8, 2018 Report Share Posted July 8, 2018 On 8/8/2017 at 10:35 AM, RonS said: Thought I'd post the Installation/operation manuals and info on the two 2017 updates (v7.0 firmware). I recommend that everyone review them before installing. Also note the specific instructions for upgrading BT from older( < 3.10) versions to v3.32. And as before, it doesn't seem possible to add iPhone Lightning connector support(patches 4.6 or 5.1) after the fact. It must be installed before installing firmware 6.0 and higher. IDK if there is a workaround. Only Compatible With: AVIC-Z110BT, AVIC-Z120BT, AVIC-X920BT CRD5009A.pdf AVIC-Z130BT, AVIC-X930BT, AVIC-X9310BT, AVIC-Z140BH, AVIC-X940BT CRD5006A.pdf As with other updates, either product can be made to install on any of the above units when used with the proper CARDINFO file. See post #26 for the update files and see Shortfuse Hack for how to hack you unit prior to installing those files. The manuals wont open up,says page not found. Quote Link to post Share on other sites
BigCurt327 Posted July 8, 2018 Report Share Posted July 8, 2018 The maps wont do anything when I put the card in my z110bt Quote Link to post Share on other sites
Alexei Navalny Posted July 8, 2018 Author Report Share Posted July 8, 2018 3 hours ago, BigCurt327 said: The maps wont do anything when I put the card in my z110bt Did you replace the Cardinfo.cif file on the SD? The one in the ZIP is for Z130 or Z140 Quote Link to post Share on other sites
Alexei Navalny Posted July 8, 2018 Author Report Share Posted July 8, 2018 3 hours ago, BigCurt327 said: The manuals wont open up,says page not found. Looks like they removed them from Navigation.com web-site. Their link does the same thing. Here's the files: Pioneer_2017_maps-Z110-CRD5009A.pdf Pioneer_2017_maps-Z130-CRD5006A.pdf Quote Link to post Share on other sites
BigCurt327 Posted July 10, 2018 Report Share Posted July 10, 2018 On 7/8/2018 at 1:32 PM, RonS said: Did you replace the Cardinfo.cif file on the SD? The one in the ZIP is for Z130 or Z140 I've been trying I cant seem to figure out how to do it I guess.. I downloaded winrar (I seen someone suggest using it). But I cant get the one for 130 /140 to delete/move. Apparently I'm not the best with computers. Smdh Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.