Jump to content
AVIC411.com

2017 v7 US/Can Update available for Z110/120/130/140,X920/930/940


Recommended Posts

I tried it with the original sd and got the same error.. going to try your dll here if i get enough strength

If the problem is with a corrupted RenewallFlib.dll then the original 2017 SD won't fix it. When you get rested, try the one I sent (I hope you downloaded it because I deleted the attachment from the post. It had about a dozen downloads, but I didn't want everyone using it.  I didn't want dozens of babies crying if it didn't work.

 

If you have success I'll post it for everyone. If not, zip-up your original DLL and post it.

Link to post
Share on other sites
  • Replies 214
  • Created
  • Last Reply

Top Posters In This Topic

If the problem is with a corrupted RenewallFlib.dll then the original 2017 SD won't fix it. When you get rested, try the one I sent (I hope you downloaded it because I deleted the attachment from the post. It had about a dozen downloads, but I didn't want everyone using it.  I didn't want dozens of babies crying if it didn't work.

 

If you have success I'll post it for everyone. If not, zip-up your original DLL and post it.

yea i grqbbed it.. will keep you posted. thnx

Link to post
Share on other sites

Hey guys, I have a question. I have a z140. That I have hackmode on. But I got supertest and booted into test mode. I made a back up and put it on my comp. Then copied from the HU the renewall file and used hxd to change the hex to what the instructions specified. And installed it back on the HU. Then using a separate SD with the unzipped updated map file, put it in my HU and it's not recognizing the SD. No option to update or anything. I even tried switching the cardinfo.cif file and still nothing. The stereo and everything works. But won't read the SD. Any ideas as to why?

Link to post
Share on other sites

Man thanks for the quick reply but I'm a dummy. I figured it out. I copied the whole file over to the SD so the HU was only seeing the folder with the files in it. So I took them out of the folder and it's updating now. I'll keep you posted on how it goes. This will be my first map update on the unit. Thanks again.

Link to post
Share on other sites

post 26 I think

Sorry guys had strep and hit me hard all week.. here you go:
https://drive.google.com/open?id=0B5KpUvEq0nCnb29SZFVlNTZrZUk
 
hopefully someone cracks it! Password: avic411s
 
 
Update: here's the zipped Cardinfo.cif needed for Z110/Z120/X920. Unzip and replace the one in the above archive.  I added this here since it's better to keep related files in one place. RonS

Link to post
Share on other sites

Maybe I am missing something. I do not see a link to the actual maps file. It seems there are several individual files that are posted, but not the large map file. Is it just me? I recently updated to the 2015 update. I would love to update to the 2017 7.0 file. 

well its not a giant map file.. its a zip, with a ton of files inside of it.. not sure what youre askin

Link to post
Share on other sites

Going to try this tonight! Finally not dying. On another note, anyone tried this with the x920/z120 cif file? I have a buddy with a z120bt who im trying to convince to try it but he doesnt wanna be the guinea pig  :mrgreen:

Well on the F Series forum, they were successful installing the EU v7 on F20BT and F920BT. So the US should work with the correct CardInfo file.  I posted it earlier.  Make sure he follows the BT instructions in the installation manual - especially if it has old BT firmware ( < 3.10). If your bud has any issues connecting to iPod/Phone or other wired/wireless apps, do a hard reset and make sure App Connections is set correctly. I had to do that to get some things to work correctly.

Link to post
Share on other sites

Well on the F Series forum, they were successful installing the EU v7 on F20BT and F920BT. So the US should work with the correct CardInfo file.  I posted it earlier.  Make sure he follows the BT instructions in the installation manual - especially if it has old BT firmware ( < 3.10). If your bud has any issues connecting to iPod/Phone or other wired/wireless apps, do a hard reset and make sure App Connections is set correctly. I had to do that to get some things to work correctly.

goos to go on my x940. Thanks your DLL did the trick. Still not sure what tf happend with mine.. i double checked it and everything was correct

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...