manreal1 Posted July 23, 2018 Report Share Posted July 23, 2018 Avic-7000Nex seems to have bricked. When i boot the system, it shows "Reading Please wait for while" and then shows the update failed! screen (photo attached). I tried updating the firmware, but it always shows updating 1.03 to 1.03 regardless of what version of firmware is on the usb drive. I already tried using different usb flash drives (about 6~7). The usb flash drives is inserted in usb1 slot. I can see the device reading the data from the usb drive, but for some reason doesn't detect the new firmware. Each time i put in the usb drive, it takes a while to read the data on the drive, then shows updating 1.03 to 1.03, progress shows -1 at it exits to the update failed screen. I looked through several forums, but i can't seem to find anything to fix my screen. Any help would be deeply appreciated. Quote Link to post Share on other sites
Tarcisomix Posted April 4, 2021 Report Share Posted April 4, 2021 Hi manreal1, did you solve your problem? i have the same. Quote Link to post Share on other sites
cicero belem Posted April 4, 2021 Report Share Posted April 4, 2021 Entra no testemode e faz recovere Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.