Jump to content
AVIC411.com

PAC RPK4-FD2201 install. No backup camera


Recommended Posts

I just recently installed a Pioneer AVIC-w6400NEX in my 2018 Ford F-150.  I replaced the small 4.2 screen.  I used a PAC RPK4-FD2201 install kit.  Everything is working fine except my backup camera.   It’s just a dark screen.  I have went through the settings on the 6400.  I’m positive I have them set correctly.  When I installed the PAC kit,  their harness had a red/white wire coming off of the harness.  Their legend for the wire said 12v+ Programmable Output.  I did not hook this wire up because I wasn’t sure of it’s purpose and if it should be hooked up to a solid red wire. Here’s a link to their PAC’s install directions.  Any help would be greatly appreciated if you think this is why my camera is not working.   I’m not sure where the backup camera gets it’s power from.  Thanks!

index.php?controller=attachment&id_attac

-Bill

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...