mroset Posted May 19, 2020 Report Share Posted May 19, 2020 On 15-5-2020 at 6:43 PM, maunav90 said: Me the same, i didn't put the original back... I tried @spoon1 aand now it ask to put again password, like it doesn't accept Quick response: I updated my father's AVIC-F930BT this evening, and everything was successfull (I'll share a more detailed document accompanied by screenshots later on). So please be informed that - in my case at least - it accepted the 'PASSWORDPASSWORD' combination without complaining, and completed the upgrade in about 20-30 minutes time. Perhaps it is worth mentioning that I got a different message about the password. In Dutch of course, and it stated 'Geef het wachtwoord van Pioneer in om door te gaan met de update. Druk op annuleren om update te stoppen'. I was offered 3 options 'Yes', 'No' and 'Cancel', and chose 'Yes'. That seems very different than what @maunav90 got in Italian ('Inserire password nuovamente?') , which seems to suggest a question to CHANGE the password, not to merely enter it.. Final note: I came from a 2011 (hence very old) firmware. Could that be the difference here between what I got and what @maunav90 got ? Basic steps that I followed (based upon the guide from @spoon1 and input from @RonS as well on how to proceed): - Prepare SD-cards (#1 with ShortFuse hack files, 2 Gb minimum/FAT32-formatted and #2 with 2019 map update (see files shared by @godzilla, 8 Gb minimum/FAT32-formatted) - Install SD1 and install the ShortFuse hack - Install SD2 and install the 2019 map data (note: firmware device updates were automatically installed after the 2019 map data was loaded successfully) - Prepared/Reused SD1 for the TTS (Voice) files and chose/installed the navigation voice language (in my case Dutch) from the menu IMPORTANT NOTES: - Since the AVIC-F930BT is a "MY2011" device, there was no need to modify or manipulate the CARDINFO file. In other words: I simply included/recursively copied the one from the 2019 Map Update ZIP file that @godzilla shared with us already. Obviously, the ShortFuse hack will do the magic trickery already, and there's no need to modify the CARDINFO file either. Quote Link to post Share on other sites
Alexei Navalny Posted May 19, 2020 Report Share Posted May 19, 2020 1 hour ago, mroset said: Quick response: I updated my father's AVIC-F930BT this evening, and everything was successfull (I'll share a more detailed document accompanied by screenshots later on). So please be informed that - in my case at least - it accepted the 'PASSWORDPASSWORD' combination without complaining, and completed the upgrade in about 20-30 minutes time. Perhaps it is worth mentioning that I got a different message about the password. In Dutch of course, and it stated 'Geef het wachtwoord van Pioneer in om door te gaan met de update. Druk op annuleren om update te stoppen'. I was offered 3 options 'Yes', 'No' and 'Cancel', and chose 'Yes'. That seems very different than what @maunav90 got in Italian ('Inserire password nuovamente?') , which seems to suggest a question to CHANGE the password, not to merely enter it.. Final note: I came from a 2011 (hence very old) firmware. Could that be the difference here between what I got and what @maunav90 got ? According to Italian section of the map installation manual, the prompt to enter the password is preceded with this screen: I don't speak or read Italian (or Dutch), but this is probably equivalent to what you described for your installation. After responding "Si", it prompts the user to enter the password. I think the image @maunav90 posted is after he entered "PASSWORDPASSWORD" and it was rejected. So it was asking the user to re-enter the password. I suspect that he never (or incorrectly) installed the Shortfuse hack, so the password it was expecting was the "real" one registered for this unit's serial number. Not the hacked one "PASSWORDPASSWORD". Quote Link to post Share on other sites
chasovnik Posted May 20, 2020 Report Share Posted May 20, 2020 sorry for my english. hello friends my navigation is with maps from MY2010 - original map, never update , should I change cardinfo -file with 2017y or follow the steps described in the forum? Quote Link to post Share on other sites
mroset Posted May 20, 2020 Report Share Posted May 20, 2020 12 hours ago, RonS said: According to Italian section of the map installation manual, the prompt to enter the password is preceded with this screen: I don't speak or read Italian (or Dutch), but this is probably equivalent to what you described for your installation. After responding "Si", it prompts the user to enter the password. I think the image @maunav90 posted is after he entered "PASSWORDPASSWORD" and it was rejected. So it was asking the user to re-enter the password. I suspect that he never (or incorrectly) installed the Shortfuse hack, so the password it was expecting was the "real" one registered for this unit's serial number. Not the hacked one "PASSWORDPASSWORD". That makes total sense and yes, this is exactly the same popup window that I got in Dutch (Man, never would have expected that this forum would improve everyone's language skills right ). I suggest that @maunav90 gets back to us and let us know in detail whether that was the case and/or how he resolved the issue. In any case, it all worked brilliantly and without a glitch for my father's AVIC-F930BT (maps upgraded from 2011=>2019, firmware upgraded to 8.000) , so thanks for all the efforts @RonS, @godzilla and @spoon1 , also on behalf of my happy father ! I even hooked up his relatively new Samsung smartphone to Bluetooth in the car while I was at it. That was also a real eye-opener for him, and it was clear that this will result in safer driving. Quote Link to post Share on other sites
brommie Posted May 21, 2020 Report Share Posted May 21, 2020 It is installed and it works well, just a pity that some street names are not known suddenly, or a roundabout that is not in the right place, but it works well. Thank you Quote Link to post Share on other sites
chasovnik Posted May 24, 2020 Report Share Posted May 24, 2020 Thank you friends! Quote Link to post Share on other sites
djexplorer Posted May 26, 2020 Report Share Posted May 26, 2020 @spoon1 Hello! If I have a hack and update installed from 2017, can I only install the new maps? Only 8 Gb card? F930BT? Thank you. Quote Link to post Share on other sites
brommie Posted May 27, 2020 Report Share Posted May 27, 2020 18 hours ago, djexplorer said: @spoon1 Hello! If I have a hack and update installed from 2017, can I only install the new maps? Only 8 Gb card? F930BT? Thank you. @djexplorer i did the hack, and afther that i installed the maps. Just for sure. Quote Link to post Share on other sites
Nessuno Posted May 28, 2020 Report Share Posted May 28, 2020 On 14-5-2020 at 9:33 PM, ds70 said: I have updated my F10BT with a changed CARDINFO. Works perfect. Thanks to all !!!! what cardinfo did you use ? cheers and thanks! Quote Link to post Share on other sites
japie91 Posted May 28, 2020 Report Share Posted May 28, 2020 Posted by RonS in the 2017 thread: Cardinfo file Quote Link to post Share on other sites
Topchacha Posted May 29, 2020 Report Share Posted May 29, 2020 I'm stuck it's saying incorrect sdcArd how do I fix this Quote Link to post Share on other sites
Topchacha Posted May 29, 2020 Report Share Posted May 29, 2020 @spoon1assist me plz Quote Link to post Share on other sites
fred_feuerstein Posted May 30, 2020 Report Share Posted May 30, 2020 Update done on f920bt. Procedure the same as 2017. Thx. @godzilla for maps and @spoon1 for the Infos. Quote Link to post Share on other sites
fred_feuerstein Posted May 30, 2020 Report Share Posted May 30, 2020 That's correct. Without the hack, the password from the maps update is not accepted. I tried it without the hack, because I used the hack with the 2017 maps, but it don't work. Then the short hack and after that, the map update was no problem. Quote Link to post Share on other sites
sniper25star Posted June 1, 2020 Report Share Posted June 1, 2020 Hello, first of all thanks to the friends who contributed. - I have a F940bt device, I have updated 2017 before. But how I did it, I don't remember exactly. Anyway, I want to make a 2019 update; For this, I downloaded the files of the first godzilla. https://drive.google.com/open?id=1o7rfWz2qB67V5p9CfuMb0SpmMTGNjLuN Software https://drive.google.com/open?id=13k1m5B19rP-D3lhQbGSbvUqpp5OryJMJ - TTS CD Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.