Jump to content
AVIC411.com
godzilla

New Release F20BT F30BT F40Bt F920BT F930BT F940Bt F840BT Etc 2019

Recommended Posts

On 11-5-2020 at 12:22 PM, mroset said:

@intranetten Thanks for your donation to this project.  It all may have taken more time than expected, but I personally am still confident that Godzilla will deliver as promised.

@Corvus This thread is very much alive and kicking, we're merely waiting for the 2019 map to arrive at Godzilla

@godzilla Any clues on the status of the shipment ?  May I suggest contacting HERE NL, and signalling that the package has still not arrived, and presumably is 'missing in action'.  You've waited for 4 weeks now to no avail; I think it would be more than fair for them to check the delivery status and/or send you another card for free. Thanks.  

:rolleyes::D

Share this post


Link to post
Share on other sites
19 hours ago, godzilla said:

I do not own one of these units so cannot test the short fuse hack to see if that works . 

Mine is F920BT so i can help with that unit. Cheers

Share this post


Link to post
Share on other sites

I want to give all members who want to update their pioneer a small gift!

i used sd1 2gb card and i put inside: haker,voices and speedcam

i used sd2 8gb and i put inside the new maps

tested and works in every pioneer my2011 (i mean tested on every model !)

also i tested into every pioneer model my2010 , must change only CARDINFO file , thst's all !

Update Pioneer Avic series MY2011 ENGLISH.pdf

Share this post


Link to post
Share on other sites

maybe members need also some info to update their pioneer ?!

for my2011 use the maps posted by godzilla and the haker that you can find here in this site ...and look to my guide !

for my2010 use same maps posted by godzilla but you must change CARDINFO file with cardinfo takken from 2017 maps for my2010 and i also used the other haker (password is every character you want until the end you can digit !)
do like this and you will not have problems

Share this post


Link to post
Share on other sites

@godzilla  Thanks for sharing, I've already downloaded the files and need to follow up and test it on my father's AVIC-F930BT in the next couple of days. I'll  let you guys know the results and create a document with some instructions and screenshots while I'm at it. Before that, I'll have to revisit and carefully read all the instructions and info on the RonS hack method for the CARDINFO file, but I'm sure I'll manage to do that.

@spoon1  Thx as well. I'll check out your info and locate/use your guide on doing this as well.  Do I read from your message that you also successfully used the 2019 maps on your MY2011 device provided by Godzilla yesterday ? Or were you referring to successfully using the 2017 maps provided before ? (Procedure shouldn't be different for 2019 vs 2017 maps as we have learned, but anyway, just curious....)

@intranetten  Wow, that's quick, great feedback, I think you must be the first to report back success (or perhaps spoon1 beat you to it, when using the 2019 maps that is....  :-))  ).  Could you perhaps share a quick overview of what you did in terms of the steps involved ? Did you simply use the available instructions in this thread and was it a straightforward process, or did you run into any issues ? BTW: Did you update the firmware of the device as well  (I hope I understood correctly that new firmware is shipped with the map update as well)

Share this post


Link to post
Share on other sites

i used my maps , i had this map since sectember 2019 ! ...the maps are the same godzilla posted i think !

procedure is the same as 2017 maps ....

 istruction are like i told you .... it was tested n everykind my 2010 and my 2011 pioneer devices !

for my 2011 use the maps posted by Godzilla (original maps) ..to update use 2 sd card , one for hack other for maps

for my 2010 use the maps posted by Godzilla (original maps but i changed CARDINFO file with 2017 maps for device: my2009/10) ..to update use 2 sd card , one for hack other for maps

that's all ..easy to do and perfect working

you can disactive your antivirus (norton,avast...) that can attack a file during copy map file into sd card !

this update will update your firmware to version 8.00... and the maps to europe 2019...

then you can also update TTS VOICES at last with cd immage posted by godzilla but i updated tts voices by sd card ...put voices folder into any sd ...look my guide .

i done this update since september ...so i updated many device , problems encountered? =  zero!

 

Share this post


Link to post
Share on other sites

@spoon1 Ah, that's right, I understand, I forgot for a moment that you already had the 2019 maps for some time...  Thx for reminding us.

Great that you shared the other detailed info, that will surely help others (including myself :-)) ) as well. 

I wil descibe the process on my end as well (AVIC-F930BT, hence a "MY2011" device) when I get to that and share it here.

Take care.

Share this post


Link to post
Share on other sites

My steps to install this update:

I've created a 2 Gb SD-Card with the setup of Short-fuse hoken.

(see attachments). Smart to keep the testmode.key file back-upped.

This is also available on this board see @ShortFuse

After inserting the SD card the system start updating and everything as written in the manual (from @spoon1in this topic) went well.

I took my 2017 CARDINFO.cif file and replace the CARDINFO.cif file from de download with this 2017 one on the maps SD-Card.

After the unlock, I restarted the FB920BT and put the MAps SD card update 8 GB SD created from the download in.

After 30 minutes the new maps were installed and software was also updated.

 

After that (also according the manual) you are able to update the TTS files using the second download.

However I'm Dutch I did not get to the point to use them (I assume only those entries with TTS added after the country name in the interface from your navigation device are needed to be updated)

 

ShortFuseScript.zip

ManualShortFuse.rtfd.zip

Edited by intranetten
to complete the procedure

Share this post


Link to post
Share on other sites

for @INTRANETTEN and for Dutch, Belgian,Luxembourg friends 

download the speedcam in the attachment, then open it with 7.zip

format a sd card into FAT32 and then put inside the PC folder 

turn on Pioneer radio and start navigation , wait 1 minutes and then insert sd card with PC folder inside , so you can see on display that there is a new database to install ...do it and you'll have speedcam update to 2020 !

 

ABOUT TTS voices , put VOICE folder into a sd card then update your TTS VOICES looking my guide.

 

 

BELGIUM HOLLAND LUXEMBOURG.7z

Share this post


Link to post
Share on other sites
1 hour ago, spoon1 said:

for @INTRANETTEN and for Dutch, Belgian,Luxembourg friends 

download the speedcam in the attachment, then open it with 7.zip

format a sd card into FAT32 and then put inside the PC folder 

turn on Pioneer radio and start navigation , wait 1 minutes and then insert sd card with PC folder inside , so you can see on display that there is a new database to install ...do it and you'll have speedcam update to 2020 !

 

ABOUT TTS voices , put VOICE folder into a sd card then update your TTS VOICES looking my guide.

 

 

BELGIUM HOLLAND LUXEMBOURG.7z

Is the TTS also needed for the Netherlands and countries that do not have TTS extension in the selection menu of languages in the navigation software?

Share this post


Link to post
Share on other sites

Installed and running fine on F20BT! Thanks !!! Thanks !!! Thanks !!! pioneer soft ver 08.0000  .bluetooth ver 3.32 maps 2019.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×