cjr300c Posted June 17, 2021 Report Share Posted June 17, 2021 Anyone had problems where the splash screen comes and then the pioneer screen and the the radio turns off. Maybe I pulled to much on the screen frame when I was changing the SD Card and possibly loosened the ribbon cable connecting to the screen frame. I’ll post pics in a couple hours. Quote Link to post Share on other sites
asd255 Posted June 17, 2021 Report Share Posted June 17, 2021 if you have disconnected the DVD cable then check it the radio does not turn on if it does not detect the DVD Quote Link to post Share on other sites
cjr300c Posted June 18, 2021 Author Report Share Posted June 18, 2021 13 hours ago, asd255 said: if you have disconnected the DVD cable then check it the radio does not turn on if it does not detect the DVD Ok, thank you. I did disconnect it. I will double check then reconnect it. I was having trouble clicking and locking in both sides of the ribbon cable on the DVD player. 13 hours ago, asd255 said: Quote Link to post Share on other sites
cjr300c Posted June 21, 2021 Author Report Share Posted June 21, 2021 On 6/18/2021 at 1:23 AM, asd255 said: if you have disconnected the DVD cable then check it the radio does not turn on if it does not detect the DVD Thank you. The problem was I installed the ribbon cable for the DVD player upside down. Lol. Now the radio lowers up. I’m using the 4400 firmware until the SD Card arrives with the 4500 firmware. Thanks again. I did order from but on eBay about 9-10 days ago. Quote Link to post Share on other sites
Fedeviso Posted August 18, 2021 Report Share Posted August 18, 2021 On 6/21/2021 at 8:03 PM, cjr300c said: Thank you. The problem was I installed the ribbon cable for the DVD player upside down. Lol. Now the radio lowers up. I’m using the 4400 firmware until the SD Card arrives with the 4500 firmware. Thanks again. I did order from but on eBay about 9-10 days ago. Hi, did you received the new SD card? Is it work? im with the same problem... Quote Link to post Share on other sites
JP106 Posted October 7, 2022 Report Share Posted October 7, 2022 I have this issue, the screen comes on but looks like the attached. The backup camera works. I updated the SD card with new firmware and same issue. I purchased a new unit and replaced the screen alone and still same issue, I installed the new one and it works so its not the screen, wiring or firmware (SD card). I checked all ribbons and they are all firmly connected. I think the unit may have just died but I really can't tell. Anyone had this issue? The unit was working for a year then one day it just started looking like the attached, nothing happened apart from just regular use. Any help would be appreciated, thanks IMG_9922.HEIC IMG_9908.HEIC Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.