Jump to content
AVIC411.com

Anyone needing wire info


Recommended Posts

2006 Toyota 4Runner

Speed Sense purple/red ECM, 2nd plug from bottom, pin 8
Notes: The ECM (Engine Control Module) is behind the glovebox.

Also found at the radio harness or, if equipped, the stereo amplifier behind the passenger side quarter panel.

Reverse Light red/yellow + left of fuses, 16 pin plug

merry xmas
Link to post
Share on other sites
  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Working on the installation for avic80 on my 2002 lexus rx300. I have been trying to find the VSS wire with no luck. Appreciate some guidance.

PS. I found one piece of info from Directwire. it says the speed sensor is the violet/white wire out of the cruise control computer above the driver fuse box. I assume it's the fuse box below the instrument panel and the two connectors right above it, but had no luck in locating it there...
Link to post
Share on other sites
  • 2 weeks later...
Speed Sense = dk. green/white 4K instrument cluster, pin A4 or PCM

The PCM (Powertrain Control Module) is in the left front of the engine compartment to the left of the fan shroud.

On gas models, the VSS wire is in the green plug, pin 50.

On diesel models, the VSS wire is in the black 58 pin plug, pin 42.



thats all i got
Link to post
Share on other sites
frontier, 06 i dont have 07 info, but 06 is

Speed Sense = lt. blue radio harness or cluster, pin 6

May not be present on vehicles with base level audio systems.

Reverse Light = lt. blue + driver kick, harness to rear



Toy cor. 06

Speed Sense = purple/white ECM, second plug from right, pin 17 The ECM (Engine Control Module) is behind the glove box.

Reverse Light = red/black + front of fuse box, 10 pin plug
Link to post
Share on other sites
[quote name="tillithz"]frontier, 06 i dont have 07 info, but 06 is

Speed Sense = lt. blue radio harness or cluster, pin 6

May not be present on vehicles with base level audio systems.

Reverse Light = lt. blue + driver kick, harness to rear



Toy cor. 06

Speed Sense = purple/white ECM, second plug from right, pin 17 The ECM (Engine Control Module) is behind the glove box.

Reverse Light = red/black + front of fuse box, 10 pin plug[/quote]


thanks for the reply. i will try them. also i forgot....
same wires for a 2006 honda pilot without RES or Navi.
will be installing pioneer N3' on my frontier and corolla and pioneer z1 on the pilot. thanks
Link to post
Share on other sites
pilot 06
Speed Sense = blue/white driver multiplex ctrl unit, pin 14 The driver multiplex control unit is attached to the driver side fuse box. It has a green 22 pin plug on the side of the fuse box facing the firewall.

Reverse Light = green/black + passenger kick, harness to rear
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...