Jump to content
AVIC411.com

Worldcloud

Members
  • Content Count

    4
  • Joined

  • Last visited

About Worldcloud

  • Rank

  1. Lots of questions and few answers. I have a C6 Corvette w/o OnStar, but I purchased new A pilar trim to build custom tweeter mounts. The new pilar pieces have the 2008 OnStar mic with two wires: one red, one blue. We know the Pioneer uses a mono 2.5mm jack. I just need to know which wire should go to the tip of the 2.5 mm and which goes to the base. I've read that the OnStar mic is pretty good and I like the OEM look and placement. My initial thought was to dremel the factory mic to pieces until all that remained was the grill and then use a hot glue gun to attach the pioneer mic, but
  2. Lots of questions and few answers. I have a C6 Corvette w/o OnStar, but I purchased new A pilar trim to build custom tweeter mounts. The new pilar pieces have the 2008 OnStar mic with two wires: one red, one blue. We know the Pioneer uses a mono 2.5mm jack. I just need to know which wire should go to the tip of the 2.5 mm and which goes to the base. I've read that the OnStar mic is pretty good and I like the OEM look and placement. My initial thought was to dremel the factory mic to pieces until all that remained was the grill and then use a hot glue gun to attach the pioneer mic, but
  3. Lots of questions and few answers. I have a C6 Corvette w/o OnStar, but I purchased new A pilar trim to build custom tweeter mounts. The new pilar pieces have the 2008 OnStar mic with two wires: one red, one blue. We know the Pioneer uses a mono 2.5mm jack. I just need to know which wire should go to the tip of the 2.5 mm and which goes to the base. I've read that the OnStar mic is pretty good and I like the OEM look and placement. My initial thought was to dremel the factory mic to pieces until all that remained was the grill and then use a hot glue gun to attach the pioneer mic, but
  4. Lots of questions and few answers. I have a C6 Corvette w/o OnStar, but I purchased new A pilar trim to build custom tweeter mounts. The new pilar pieces have the 2008 OnStar mic with two wires: one red, one blue. We know the Pioneer uses a mono 2.5mm jack. I just need to know which wire should go to the tip of the 2.5 mm and which goes to the base. I've read that the OnStar mic is pretty good and I like the OEM look and placement. My initial thought was to dremel the factory mic to pieces until all that remained was the grill and then use a hot glue gun to attach the pioneer mic, but
×
×
  • Create New...