Jump to content
AVIC411.com

anir22

Members
  • Content Count

    6
  • Joined

  • Last visited

About anir22

  • Rank

  1. I want to get rid of the nag screen too. how to I remove the black caution screen. can you please explain in detail. Thanks.
  2. Most of my videos would get an error messages and I kept looking online for the video resolution and formats and after few days found this and wanted to share with you all. Video Playback: The Pioneer AVIC-X930BT supports the following video files recorded onto a USB storage device or a microSD/microSDHC memory card: Video Format MPEG4 H.264 WMV File Extension .avi .mp4 .m4v .wmv Compatible Audio Codec Linear PCM AAC AAC WMA Recommended Video Specifications Image Size: QVGA (320 x 240) Bit Rate: 768 kbps Frame Rate: 30 fps Bit Rate: 384 kbps Frame Rate: 30 fps Bit Rate: 384 kbps Frame R
  3. I got it working. I connected the camera power cable and the reverse input signal wire from the x930bt to the same 12v output behind the license plate. In x930bt there is a option to view the rear camera whithout reversing for trailers etc. but my camera doesnt stay on. Any idea which wire I should connect it to keep it on(right now I have connected it to green/white wire in murano 06) Any idea where speed sensor wire can be connected to?
  4. Thanks for your reply. Yes I used the adapter harness to connect the stereo to the factory connection. It has the label on the pioneer system on the wire as speed sensor and reverse signal but I dont know where to connect these wires. I found this in the manual "Violet/White (REVERSE GEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling f
  5. I am trying to install a reverse camera PYLE PLCM18BC on my NISSAN MURANO 2006. I connected all the wires but when in reverse the screen doesnt change. What are the Reverse Gear Signal & Speed Signal wires for and how to and where to connect it. I have connected the yellow video cable from the camera to the back of the dvd player and connected the power cable wire with two wires red and black..red to the 12v(green/white) wire behind the licence plate for continuous connection and the other black wire to rear regulator mount for grounding. Am I missing any connection or doing something w
×
×
  • Create New...