Jump to content
AVIC411.com

mikek753

Members
  • Content Count

    4
  • Joined

  • Last visited

About mikek753

  • Rank

  1. hi, No, I didn't find any solution. It got better, but I think it's heat related and as weather now isn't as hot it works Ok pls. post if you'll find anything.
  2. thanks for the reply. No, camera in my case isn't powered unless car is in "R" position. So there is no camera overheating issue. please, take a look at my video that shows how 5sec power reset re enables HU camera input https://www.youtube.com/watch?v=z6C19gX-8zU
  3. hi, when car is started and put in reverse backup camera displays video feed to HU just fine however, after 20-40 min drive when I try to park and switch to reverse I got black screen with HU warning ... mirrored ... if I turn off engine and wait for a min or two and turn car to ON or start engine I get video feed on HU just fine I tried to disconnect backup camera when I got black screen (car with engine ON after parking against curb and switch in reverse position) and connect video camera / camcorder input to backup camera output and camcorder shows video just file. so, looks like bac
  4. hi all, I got MHL(black) from samsung.com that also comes with 5-11 pin However, when MHL is connected to Samsung S3 GPS signal got cut and data is impacted as well. Take a look how GPS test is impacted when MHL is connected and disconnected video I have X8500BHS and video via HDMI works, but without GPS it is useless. I went through Sumsung support hell and were told that it's normal that GPS and data got cut as I don't need those to watch on TV anyway ... , while another tech said it isn't normal and GPS has to work regardless - not sure whom to believe What MHL adapter do you
×
×
  • Create New...