Jump to content
AVIC411.com

Pogigreg

Members
  • Content Count

    82
  • Joined

  • Last visited

About Pogigreg

  • Rank
    Member

Profile Information

  • Location
    SPRING, TX
  1. So, I bought a 7000 NEX last week. It was used and it was missing the microphone. I alaready had a Kenwood Bluetooth radio installed, so I removed the radio and used the mic that came with the Kenwood. I had to buy a 3.5 female to 2.5mm male recucer to plug in to the mic. The problem is nobody can understand me. Siri can't understand me. I have to practically scream to become clear. Is this because of the reducer? Do I need a complete 2.5 mm microphone without reducer? Is this why the quality is so bad?
  2. You saying that is the only reason it is not working?
  3. I am trying to do the upgrade. At the end of the copy, I reset for 5 seconds, and I get this message on the screen. What does this mean? How do I fix it?
  4. Guys, I apologize in advance, I have not mastered the manipulation of the F series Avic. I would really appreciate it if you can help me wit this upgrade. I' followed the instructions to the letter, and after I reboot for 5 seconds, the splash screen comes on, then the unit goes black. I can hear it running, but nothing on then screen .will someone please help me out.
  5. I just performed the 3.0 upgrade, but the unit is not in my vehicle. I am using my 12v bench tester. I have the red and yellow wires attached to the positive, and the the ground attached to the negative. This allows me to test radios. I have three F700BT's I picked up pretty cheap. I followed the directions to the letter. At the end when it was done, I ejected the SD card, held the reset button for 5 seconds. The splash screen came up, then went black, and stay that way. Did I do something wrong?
  6. Did the upgrade, got error message Application AV has performed an illegal operation and will be shut down. What does that mean?
  7. I paid for my upgrade two days ago. The email I got from Pioneer seemed like they were going to ship it.
  8. My MUTE/ATT button is grayed out, on my new F7010 and I can't set the navigation voice to talk over the music. How do I get this button ungrayed?
  9. The screen in my daughter's F700 stop displaying today. Music still plays, but I can't switch between the map and AV menu. The display that says when your mobile phone is connected shows on the screen though. What's happening here? Anything I can do to remedy this?
  10. Why on earth would you even want to consider using a CD-IB100? Theoretically it would work. With that meaning you would not get the graphic visual interface that the CD-IU50V will give you.
  11. Installed a D3 in my daughter's best friend's car. I first installed it using the factory radio brackets. I soon realized that I had to get Metra kit to get it to fit nicely. I like the way it has a stock look.
  12. I installed an F700BT in my buddies Hummer today. I don't like the way the Metra kit fit though, but all in all, it was a pretty easy install.
  13. Pogigreg

    Pictures?

    No. You can only use the SD Slot or USB cable to choose pictures for your Splash screen.
  14. You don't need the illumination wire. Adjust your brightness settings through the menu settings. It's in your book.
×
×
  • Create New...