-
Content Count
12 -
Joined
-
Last visited
-
hi, you need to connect on UART and run "bsp init" to restore boot
-
I have two units F840BT and F860BT the power connector is the same but the pins inside are in different order. Check twice before you use leads from other player.
-
can you help with a script to write mtd1 and mtd2? I don't understand how to do it. Thanks
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
MX6SDL JUPITER KT 4.2.2 U-Boot > help bsp set bsp - get bsp info, or set bsp info Usage: bsp Usage: bsp init - init bsp information to init value bsp get - get bsp information from nor flash bsp passwd <passwd> - set sd card password (16bytes) bsp set <item> <value> - set bsp information to nor flash item -m: set boot mode value 0: Normal 1: Recovery 2: EasyRecovery(CopyDevice) 3: Re-EasyRecovery -l: set launch mode flag value 0: APL 1: TestMode.apk 2: Slave TestMode 3: Boot Error -t: se
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
MX6SDL JUPITER KT 4.2.2 U-Boot > bsp get BSP A is valid BSP B is valid ## A Side BSP Information: Magic Number :0xa55a5aa5(a55a5aa5:Valid, other:Invalid) Boot Mode :0x00000002(0:Normal, 1:Recovery, 2:EasyRecovery, 3:Re-EasyRecovery, default:Normal) Launch Mode :0x00000003(0:APL, 1:TestMode.apk, 2:Slave
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
I;m getting this and after 20sec it's restarting U-Boot 2009.08 ( 3月 19 2014 - 10:34:06) CPU: Freescale i.MX6 family TO1.1 at 792 MHz Thermal sensor with ratio = 175 Temperature: 46 C, calibration data 0x5534a27d mx6q pll1: 792MHz mx6q pll2: 528MHz mx6q pll3: 480MHz mx6q pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 198000000Hz emi_slow clock: 99000000Hz ddr clock : 396000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 c
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
any tip on how to connect? I have connected directly on serial port and trough different usb2serial adapters using hyper terminal or putty, with different baudrates, but I'm receiving only ASCII chars? Please HELP.
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
can someone offers some details about how to connect on UART? I have a F860BT in boot loop, restarting itself UPDATE: found it, I will post it here more info http://avic411.com/index.php?/topic/81469-avic-development-mod-device-backup/page-2&do=findComment&comment=340156
-
Hi, can someone make me a Copy_Script.sh to restore my NOR flash backup? I don't know linux and I want to restore those 3 files from another unit. Thanks in advance. UPDATE: looks like my NOR was corrupted. Tried to run ModeChange with Testemode_n.key in order to unlock card and now is in reboot loop and nothing is working. So I need a tutorial on how to connect on UART and restore NOR. I have a NOR backup from another identical unit. UPDATE2: found the UART connection.
- 55 replies
-
- kernel boot
- development
-
(and 8 more)
Tagged with:
-
1.11 with AVICSYNC already out for x000 series. Also for european models, fw 1.11 with AVICSYNC, is available http://www.pioneer-car.eu/eur/avicsync
-
Hi, where to get it? it's free?
-
hi, where is the attach?
- 25 replies
-
- AVIC-F900BT F700BT
- F9110BT (2013)
-
(and 1 more)
Tagged with: