NerdBox

That's good news. What I did was just download the backgrounds on this site. I suggest you get an image that you know works and use a pic editing program like IrfanView and compare the image size with your pics. That's all I can think of. http://www.irfanview.ca/

I think it might be the 'RW' part of things that is the problem. I can't say for sure, but in my experience rewritable media has been the least reliable to be read out of all of your choices. I still say, go to 7-11 or a corner store, spend $5 on a normal cdr or dvd - or + R and try that. good luck

This is only a hunch, but I know the feeling when you're 'at a loss' so to speak, and don't know what else to try. I imediately thought it might be your media. It sounds funny depending on your experience with burning disks, but it's possible that the drive in your N4 might not like the brand of burnable media you're using. I suggest you buy disks that are made by a different company and try again. These things seem to be pretty finicky. Also, fyi, I used imgburn to burn the disk that worked for me. I don't know what burning software you used but this might help. http://www.imgburn.c

I don't have an F series but in another thread I've mentioned that some nav units in England has John Cleese's voice. I would almost consider selling my N4 to get one of these if that could be set on the F series!

I heard in England you can get a GPS with John Cleese's voice!

I have an N4 and I've always bunt all my mp3's on 4.7 dvds using nero and it's data burning selection. i've never had any problems. I would say try a different brand of media, or software, or burner. It could be any one of these things. I can only speak of how the N4 works, but since I don't know what model you're using I can't really say much more. As for the CD100-UB I just got one a few weeks ago and I like it and it works fine for me. Of course I would make some improvements but overall it's good. I'm able to always have my nav disk in and I'm using a 32gb flash drive that has e

good questions. I can't help much but I think the mute/att feature is for the nav voice commands (turn left in 100 meters... ect.) As for the mute time, I don't think there is a way to change it. I would personally prefer just to press in the control wheel instead of it changing the source. hope this helps.

I used a remote but there has to be another way to enter the menu. Sorry I didn't mention that.

Anyone know where the VSS wire on the 2007 Elements are?

Hi, So here is an update and how I fixed this issue that prevented me from using about half the nav features on my N4: if you go into the menu, system, hardware info, and 3d Setup (or something like that), you can see the progress of the system setup. There are progress bars for left, right, distance and 3d orientations. Above the progress bars there is a status section. Here it said "sensor initializing". Press the line where it says "sensor initializing" a button will appear that says "Clear" (so simple, yet so important). It completely cleared all the progress bars. I was wor

Found the issue. I was a bad ground on the rear speakers. The stereo still isn't initializing but I guess I should just give up.

I got this installed in Calgary at a place called Visions in the NW. He told me that he hooked up the sub but after taking the radio out and looking i don't think the sub is connected at all. There was two wire harnesses just hanging out. I'm assuming that one of them is for the sub, but I can't tell you what they're for though. He told me that he connected the whole stereo through the factory amp including the sub. The car is a 2004 Honda Element EX

Hi, I have posted this on www.elementownersclub.org as well So I'm coming to you guys again for help. I can't tell you how happy I am that this site is here! Here's the story: I got a pioneer avic n4 installed a few months ago. The installer said he installed the video bypass and setup the sub. When I got it back the bypass didn't work and the sub didn't work either. After fighting with him I didn't want him in my car again so I decided to do it myself. I have since fixed the bypass and installed tweeters and new speakers as well. Everything was working for a few days

sorry about the late response. i found all the answers that I needed at www.elementownersclub.com I don't think I've heard of that issue before. So i'm not much help. Good luck!

I don't have any lines on mine either. But I am having trouble with it still initializing. Anyone else? I have about 1000miles/1600kms listed and all the bars are full but still it says it's initializing btw, the canadian "tech support" guys suck for pioneer car audio.