Jump to content
AVIC411.com

joshehulbert

Members
  • Content Count

    18
  • Joined

  • Last visited

About joshehulbert

  • Rank

  1. I'm not certain, but I think where you find that playlist may depend on your version of iTunes, and possibly even if it is on a mac or windows. Here is a screenshot of mine (it's under playlists in my library). Intuitively, it seems like you should see the tagged songs somewhere on the device, but as far as I know that's not the case. Hopefully you find what you're looking for! Like I said this isn't something I use much, but I did get it to work. It seems like there are definitely some variables in the setup here, so you might have to poke around to find what you are looking for.
  2. I'll admit this isn't a feature I use often, but I just went down to the car to give it a try. So obviously you have to be connected to USB, and your smartphone setup should have iphone/ipod set as the device on the NEX, and the connection method should be set to USB. You also have a setting in the NEX settings screen that indicates which USB port the iTunes tags are sent to. That defaults to USB1, though you can change it to USB2 if that is where you plug your iPod in. If you have it setup and connected you'll see the little tag icon toward the lower right of the screen on the NEX wh
  3. I believe that is all you should have to do. Which USB port do you have your iPod connected to when you do the tagging?
  4. I actually wondered after they said they were sending a replacement what I would get - it didn't show that there were any more s&d units available on their site. I'm pretty sure the replacement was a new unit. The original s&d had cruthfield tape sealing the box and some of the accessories inside. This one appeared to be completely factory packaging. So, it was a bit of a delay and irritation but it all ended up working out very well, and Crutchfield was great about it. Side note, the 8000nex is a pretty awesome unit. Definitely an upgrade from the z150bh I had before.
  5. The new unit arrived from Crutchfield and works perfectly. They even upgraded it to next day shipping at no charge.
  6. On the 8000 NEX if you have an iphone paired with bluetooth (so the smartphone settings are setup as iphone/ipod over bluetooth) can you not plug in an iphone/ipod to USB and have it recognized? In general I'd like my iphone to be paired with bluetooth, but it would be nice to be able to have a passenger plug an iphone in if there was something on there we wanted to listen to. Seems more convenient for a temporary connection than pairing the passenger's phone with bluetooth. I can plug another iphone in when mine is setup with Bluetooth, and the phone charges, but it doesn't light up the U
  7. I think that was my issue- I used the digital cable. I'll swap it out for the mini jack and my guess is I'll get steering wheel controls then. Thanks again
  8. Ah ok. I knew the firmware update was still coming but was under the impression it would support additional functionality on the maestro rr, but thought the steering wheel controls were already good to go. No problem, I can live without that for now. Thanks!
  9. I got my new 8000 nex up and running today and everything works except the steering wheel functionality from the maestro rr. In the system status menu the 8000 says be idatalink is an inrecognized firmware version. I went through the flash process on their web site for my car, selected options and the avic 8000 nex radio. Anyone else see this when they setup this combo? Would it be worth taking the maestro out and flashing it again?
  10. Thanks, makes sense. I might poke around and see if I can find a converter. Not a big deal to me honestly, more just curious if I was missing something. Thanks!
  11. Hello- I am in the process of installing an 8000nex with a idatalink maestro Rr in my 2011 gmc yukon that has the factory Bose 5.1 amp. Wiring up the harness I got the connections all done for the front and rear RCA outs, as well as the sub. What I don't see is where to put the center channel RCA on the 8000. I have the RCA for the center from the maestro, but don't see where it should go. Anyone else tackle this?
  12. I called them today actually and got an advisor (not the one I spoke to originally) but they were cool about it. They walked me through a couple of steps to troubleshoot, but nothing changed. They have another one shipping out Monday. I didn't think to ask on the phone if that was another scratch and dent, or if it is a new one that's a replacement. I didn't see anymore scratch and dents available on the site, so I guess we'll see! Main thing I was concerned about was having done something to mess it up myself in the wiring, etc. I've done stereo installs before, but not quite as extensive.
  13. It did have that look to it alright, that was the first thing I thought. It wasn't dropped on my watch, so it either had to be something in shipping or before it left. My experience with Crutchfield has always been top notch, so it seems odd they would let something out that wasn't functional. Still, things happen. Yeah it was wavy/had lines throughout, and the right side looked like a bunch of colors bleeding together. I hit the reset button prior to any setup screens. I didn't really have any option to get to any screens actually. The physical buttons lit up, but didn't respond to p
  14. Hi all - I just got a 8000NEX to replace my Z150BH. I ordered it from Crutchfield, wanting to keep the manufacturer's warranty intact. They had a deal running for a scratch/dent for almost $200 off that I was a little intrigued by. I talked to an advisor there, and they said they couldn't say exactly why it was scratch and dent, but there would be nothing that impacted the screen or the usability of the unit. I went for it. I spent some time last night getting the harness all setup with the Maestro RR. I pulled the z150bh and associated harness out earlier today and got the 8000 in. It fired
  15. Did anyone solve this? I'm having similar issues with video output to the rear. DVD works, but no other sources. It seems odd to me that one source would work and another (iPod, iPhone, sd, usb) would not.
×
×
  • Create New...