Jump to content
AVIC411.com

crankz

Members
  • Content Count

    4
  • Joined

  • Last visited

About crankz

  • Rank

Recent Profile Visitors

4,515 profile views
  1. Hi, You'll need a 12V Power Supply and some probes or solid-wire. http://images.sonicelectronix.com/images/161957/big/avicd3.jpg You have to apply 12V to the 2 Pins in the lower Right and Ground to the upper right Pin of the Connector (Power Supply 10A) Now it should come alive.
  2. Hello, i got a AVIC-MRZ99 (almost similar to Z110BT) and i bricked it by replacing PRG0 and PRG1 Folders. Now it stucks in boot-loop It's a japanese Unit and i wanted to replace the Software with an english version. Now the Splash-Screen pops up and the device reboots immediately ... and so on and so on. I can't enter Test-Mode again to put my backup back into the device. I tried some Testmode.key's from this forum including supertestmode. After a couple of reboots and holding Eject Key it shows the Message CAUTION - Test Mode FailedStarting [Turn Off ACC] Some *.exe missin
  3. Hi, i also own a MRZ99 Unit. I bricked mine, cuz i tried to replace PRG0 and PRG1 (And BOOT Folder <-- this bricked mine, to a Splash-Screen Bootloop ) However, you can enter Test-Mode by holding the NAV Button (left japanese button in the middle) and pressing right --> left --> right --> left --> right --> left and then release the NAV Button. Unit will restart in Testmode. But be careful! Good Luck
  4. Hi, sorry for posting in the wrong Subforum, but I didn't find a M-Series Subforum. I bought a Pioneer Carrozzeria AVIC-MRZ99 on eBay. It's a japanese Unit from an imported Car. The Problem is, you can't change the language to english... you can't change it generally :/ Does anyone know if I can install another firmware to this device? Maybe this device was sold in EU or USA with another Name. Hard to find some infos about it, all in japanese language :/ I tried several Testmode.key Files from this forum, but none of them worked for me. Just get the Error Message
×
×
  • Create New...