Jump to content
AVIC411.com

zukgod1

Members
  • Content Count

    57
  • Joined

  • Last visited

About zukgod1

  • Rank
    Member
  1. I've been out of the loop for a while. Decided to log in to see about selling my Z-1 and the classifieds seem to be MIA. Did we have some scamming issues?
  2. Not sure if garrettoomey is still doing HDD's or not but if he is you can get a new one pre loaded with what you need from him.
  3. See I knew I wasn't nuts, there had to be a way.. Thank you sir..
  4. z1 with Toomey Z3 hard drive.. Ok so after a few failed attempts over a 3 year time period I guess it's time to ask.. Has anyone had any success using a RCA to 3.5mm cable to use an mp3 player or phone or boom box ? Doesn't seem to compute that I cant turn on the AUX input and use a portable device to play music.. Just trying to make sure I'm not loosing my marbles.
  5. Click on this.. viewtopic.php?f=19&t=22062 Here is the linkto Pioneer to buy one http://parts.pioneerelectronics.com/par ... um=CSX1093
  6. Looks like the Touch Panel is whats cracked, See the link i posted above, it's pretty easy to change out.
  7. You need a Non Dimming illumination wire. One that just supplies 12v when the lights are turned on.
  8. Yup sure enough I had it plugged in the wrong dang port Oh well, working now. Thanks for your help yet again sir!
  9. There is only one place to plug it in on the HU no? Checking the tuner is easy but the HU not so much. If it was plugged in incorrectly how would I get the tuner to funcion?
  10. viewtopic.php?f=19&t=22062&p=148932#p148932
  11. So I moved the Z from one car to another, didn't have time to install the XM tuner during the first install so I went back today and finished. The Z see's the tuner, shows what song is playing etc etc but no sound. Can change stations, manually tune one in pic comes up shows artist but no sound. WTH???? Anyone have a suggestion?
  12. 3d calibration rest will fix you up my son Had the same problem, had to reset it twice before it finally went the correct direction. i also do not have the VSS wire hooked up.
  13. Glad this post was of some use to someone. As far as a step by step goes there wasn't much to it. The screen has to be open. Turn the unit over so you can access the little panel where the ribbon is, remove the cover and slide the ribbon out. I can't remember at the moment which side was easier to remove. I think I removed it from the head unit then removed the screen. There are 2 screws holding the screen on the sliding chassis so once the screws are removed and the ribbon is removed you can twist the assembly out, be careful of that little spring that wraps around the screw on t
  14. Well I had a huge reply all typed up but not complete, hit he "Save" button and I have no damn clue where it "Saved" it to. I'll send you a PM with my contact info and I can give you a quick walk through.
  15. I don't think your door chimes have anything to do with your head unit.
×
×
  • Create New...