05sti

I had better luck with the newer win CE firmware from the X series from this thread: http://avic411.com/forum/viewtopic.php?f=34&t=25751&hilit=x+series&start=585 Also, BUMP for a copy of the f700 SDMLC if anyone has one to upload. Here’s how to make a backup… 1: Boot into testmode 2: Select DiskRW 3: Select read 4: Select “SDMLC” under “store” 5: Choose a place to save it by pressing “…” . Choose storage card. 6: Hit read and let it finish Thanks!

I have the same thing going on, I'm guessing it's because we flashed an F900 SDMLC. I've done a lot of searches, I can't find an F700BT SDMLC. Anyone have one they can upload?

My unit seems to have a similar problem. Hitting reset will bring allow the unit to boot and run for maybe a minute sometimes, other times I’m just left with a black screen. The fan is always running, so I don’t think it’s a wiring issue. I can boot into test mode or the wince flash update screen, in either mode the unit will power off before I can do anything, usually about a minute. Any ideas?