Jump to content
AVIC411.com

tijoseph

Members
  • Content Count

    18
  • Joined

  • Last visited

About tijoseph

  • Rank

  1. alright, this is the deal. If you get the TEL error, it is because there is some problem with the call phone and bluetooth. It just so happened that I had installed the new software on my iphone! To solve it, I just turned the bluetooth off in my cell phone, deleted the sync between it and the radio, and re synced it. A side note, the firmware update solvd all of my horrible bluetooth voice issues. Before I had been told it was a bad microphone! I knew that wasn't right
  2. havent done anything to it. Since install I havent touched it. I tried resetting it, but that didnt seem to help. I will call pioneer this morning.
  3. Everytime I start my radio it does the normal start up process, then it comes back about a minute later with a windows screen that says "Fatal application error" Man this stinks!
  4. I thought this was the case, unfortunately for my situation, even sometimes when the motor is off it sounds like crapola.... Has anyone else with mic problems tried the motor on motor off test?
  5. Mine does the same thing... Hisses, pops, etc. Even sometimes when I call, I don't hear the rings. Most of the time I do though. As far as a firmware update, they think nothing is wrong. Atleast what the one pioneer help desk guy said
  6. Okay, this is really frustrating me. I just went out to the truck and messed with it again. Engine off, engine on, AC off, and On, etc. Only this time, all calls sound like crap! I know I wasn't crazy about the quality previously, since that call is still on my answering machine. The difference is night and day. This is really frustrating. It just eliminates the engine on engine off theory. By the way, mine is bypassed. Maybe I should undo the bypass and try again. That makes me sad
  7. u have to download the manual. It is almost 200 pages long
  8. For my situation, it is not the engine noise iteself causing the problem. Heck, I can barely even hear the motor inside the cabin. The weirdest thing, is that as before, when engine is off it sounds perfect, when engine is running it sounds horrible. Well, I tested it again, this time starting with the engine on. I continue talking while I turn the engine off. No change in the quality. It seems to get the quality reception atleast for me, the head unit has to be turned on with the engine having NEVER been running. Wouldn't it make sence that as soon as I turn the motor off, t
  9. 100ft. is alot when you dont know where your desination is It isn;t always off this much, besides, I have never seen a gps beep at the front door of a house. It is always a few off, but really close! This one is more accurate than my 07 BMW 545i. And it cost a whole lot more! By the way, this is less than two 100ths of a mile. LOL
  10. I called pioneer. They said it is the microhone causing the problem. I asked how he was sure, he said they have had no other issues, so it must be that. He didn't even ask what unit I had... I just don't buy it. What would be wrong with the mic, that would cause it not to work when the motor is running?
  11. My 2 cents.... I installed this a few days ago and love everything BUT the bluetooth, which was one of the main reasons for getting this. I have had factory systems in a nissan maxima, and now in my wife's bmw, and they both worked/work awesome. I currently drive an armada and use an iphone.....(For reference of course) I gave my wife a call and she said it was horrible. I could hear her fine, but she could hardly understand me. I located my mic in the center overhead console, just like the factory installs on our other vehicles. I wanted to hear for myself, so i called the hou
  12. I didn't hook mine up... Seems to be off at times by as much as 100 feet, so not much at all.
  13. UPDATE Works great! that was my issue, didnt have the pin all the way seated
  14. Well, I tried the bypass and it didn't work for me. The only thing I think I may have done wrong is the moving of the one wire. I yanked it out the back of the white connector, and kind of pushed it into the other hole as the directions stated. I wonder if I was able to push it in as far as the other pins. I think maybe it isnt making a good connection. Is there an easy way to push that little metal pin further into the connector? What methods have those successful with this used?
  15. Thanks alot! This should help me out!
×
×
  • Create New...