Jump to content
AVIC411.com

ChrisK

Members
  • Content Count

    15
  • Joined

  • Last visited

About ChrisK

  • Rank

  1. Moving the mute wire back to it's original location and doing the software bypass will fix the radio shutdown. Just FYI. I have onstar and I hit the button by accident one day, I didn't want to deal w/ the radio shutdown anymore.
  2. The 10% coupon(s) for EBay are targeted. They are not unique codes, but if you have one, it will show up in My Messages on EBay.
  3. Another recommendation for 6th Ave. They are an authorized online dealer for Pioneer http://www.pioneerelectronics.com/PUSA/FindStore/Buy+Pioneer+Products+on+the+Internet I purchased a Panasonic plasma tv from them in Sept. Like the above poster, they did call me wanting to add extended warranty and cables, but didn't push or continue to argue that I 'needed' the items when I declined. They are a great seller.
  4. What type of vehicle is it? You have an aftermarket tuner with dual lead inputs and the OEM tuner has a single lead input?
  5. Can You explain or show how you did this? I am plaining on adding the PIONEER GEX-P10XMT to my system and wanted this mod. The info for the antenna swap is here http://forums.trailvoy.com/showthread.php?t=38444. Basically if you have a 2 lead Onstar antenna you can 'swap' the old 2 lead type antenna with a 3 lead Onstar/XM antenna. You will need to widen the hole in the roof to do this. Not much. DO NOT USE ANYTHING OTHER THEN A STEP BIT PICTURED IN THE LINK I POSTED ABOVE. Reason I say that is learn from my experience. I was hacking away at the hole for about an ho
  6. If you run EZRIDER from testmode. You can access the MSN Direct stuff, however, it just hangs there.
  7. Search would be useless because he doesn't know how to spell.
  8. I replaced the DATA.zip file that was in the first post and I'm having an issue w/ the next turn arrow not showing up in 2d mode. I'm showing a modified data of 9/8 on some of the folders when I view it. I haven't unzip'd or edited the contents of the file in any way. F700 which was original unit (no blue dot) updated w/ pioneer fw update when it came out in july. The next turn box was always there before and after the updates. The next turn box IS there in 3d mode.
  9. I got the F700BT through Ebay about 2 months ago w/ Live Cashback it worked out to about $438 shipped. The cashback was available yesterday and I cashed out. You could always throw in a Square Trade warranty.
  10. That's dependent on the model of vehicle you have. The radio starts when I turn the key to the accessory position, if I then start it, it's doesn't reboot. It'll still continue the boot process.
  11. Well I called Pioneer on this issue today. They mentioned the upcoming (but no firm date) firmware release and told me I should wait for it. Nice. 'They think it may be done but are looking for a way to distribute it' as stated by a tech at 7:35PM Eastern time. IE. 5 minutes after they close. Click. Dial tone.
  12. Yea. You need to find the XM antenna wire under the dash. If it's not there get to the headliner area where the xm antenna is and try to follow the wire under the dash. Use that to connect to the Pionner XM tuner. Since the antenna is in place you most likely have the wiring, if you do not, you can buy an extension cable and an adapter to connect it up. My GM SUV did not come w/ XM radio, however I swapped out the Onstar combo antenna for an Onstar/XM antenna, used an extension cable and a smb female to female adapter to wire to the Pio XM tuner. Works great. If you dont have the
  13. Have you performed any resets on the unit?
  14. Ya know I just noticed. When the car starts. It's at the correct time, it'll then change within 30 seconds. It goes back to GMT
  15. No matter what I do, I cant get the F700 to keep the correct time. Auto correction will not function. I've manually set the time and it keeps on going back to GST. I've changed both the time zone AND the time. Each time I turn the car back on, it's back to the GST time and time zone. Any ideas? I've preformed a button reset while the car was off and also reset to factory settings. All other memory preset functions work properly.
×
×
  • Create New...