Jump to content
AVIC411.com

rzuffi

Members
  • Content Count

    10
  • Joined

  • Last visited

About rzuffi

  • Rank

  1. ok, so i checked the gps status and it looked like i had 3 bars, then 10x for the red sat, and 0x for the yellow sat. I assume this is a bad signal. I'm still a few blocks off on my route and sometimes in the water when near the shore. I believe it is the position of the antenna and i will try a few diff spots before sending it back. A new issue with the gmos-100 is that I've now noticed that the illumination connection is not working. The HU does not dim down when the lights are on, and the sky in the gps background is always daytime... Still having the issue with factory XM bleedin
  2. I'll go check my satellite info later tonight when we go out. how do i know if the vss is working or not when i have no sat? would i simply not move on the screen? Are you experiencing the issues with the factory XM module with the gmos-100? any way to fix this or separate so that the audio only comes in via one of the aux inputs?
  3. rzuffi

    Gps ant placement

    is it bad to mount on-top of the HU? Will that magnet interfere with the electronics in the HU?
  4. problems i have with the gmos-100 harness: 1. Factory XM module always starts on channel 1 and bleeds into all speakers. i have to change the xm channel to 0 so that i can listen to the z140bh. the steering wheel controls change both the radio station and factory XM station at the same time. This all highly annoying. 2. my gps thinks i'm 2 blocks ahead of where my car is. antenna is installed on the dash on top of the provided sticky metal piece. i may have to move its position around to other metal inside the dash to make it work. Any tips/help?
  5. help. anyone else having issues with gmos-100?
  6. bump...im having same issue with z140bh...does this fix the problem?
  7. ok, so I had a sound store install everything today. They had major issues making everything work. They finally got it to work, then I took it home. I went back out a half hour later and nothing worked. No Z140bh, no onstar, no bluetooth, no chimes... Taking it back to them tomorrow to give it one last shot... Are there any know issues with Pioneer units and the GMOS-100?
  8. Ordered a new AVIC Z140BH the other day and I should receive it this week. I own a 2012 GMC Acadia and Crutchfield noted I needed the GMOS-100 adapter to maintain onstar, steering wheel controls, bluetooth, back-up camera, etc. My question is: Will this GMOS-100 adapter allow the steering wheel controls to control the Z140BH? Or do I have to purchase one the the Pioneer steering wheel controllers and somehow wire it to the GMOS-100? Also, will this GMOS-100 adapter allow the Z140BH to use the car's mic? I really would rather use the mic that comes with the car's bluetooth system.
×
×
  • Create New...