oddjobbb

I need a new wiring harness for my F90BT. i am talking about the pioneer harness that came with the HU. where do i get one. would pioneer still carry them?

thanks

the display is much better with the XM module thats why i want to switch.

i have an F90BT HU, I currently have Sirius but want to change to XM what do i need to get to convert over to XM. Thanks

I have been looking for a Mod that will enlarge and/or move the clock on the main screen. I know that there is one for the nav screen but have been unable to find one for the main screen. Any body know of one? Thanks Oddjobbb

I had the same problem. I also reverted to 2.0 and it crashed again at 3%. Here is what I did to fix it. (1) Use the service menu to update wince using the format option. Use the wince files found on SD#2. (2) Get the "My Flash Disk" files from one of the x910bt. See the hack forum for 3.0 hack. (3) Update your unit to 3.0 with x910bt files. (4) Put SD#2 in the unit with the power off. Turn on car. After the splash screen, the official upgrade will install itself. There won't be any input from you, no password or codes, just the white screen similar to SD#1 update. When it is done

just talked to pioneer support and they told me that, if the unit has been hacked or the safety features altered such as the parking brake bypass, the upgrade wont load. has anybody else heard this from pioneer? all i have done to this unit is the P. B. bypass, could this be causing my problem with the update. I find this hard to believe since so many people with hacked units seem to have no problems whatsoever.

i found instructions on how to revert back to 2.0 which i have done. I then tried to reinstall 3.0 and it did the same thing, at 3% if stopped loading. I had to revert back to 2.0 again. dont know what to do now my upgrade that i paid for seems to be worthless. Any suggestions?

I found instructions on how to revert back to 2.0 which i have done. I then tried to reinstall 3.0 and it did the same thing, at 3% if stopped loading. I had to revert back to 2.0 again. dont know what to do now my upgrade that i paid for seems to be worthless. Any suggestions?

3.0 update bricked my unit how can i revert back to 2.0. Is it even possible to go back. I searched the hacking forum and couldnt find specific direction on how to do it.

YEA Bricked my unit tonight trying to load the second memory card. Now i have a nice pretty worthless piece of s***t sitting in my 350Z.I just want to give the unit back and buy another brand.

gotcha thanks for the help.

I did the hardware bypass yesterday on my 350Z. DVD plays fine when in motion as does the the nav system. however i noticed that my brake line stays on and my check engine light came on. So i undid the parking brake ground and the idiot lights went out but now the nav and DVD wont work when the parking brake is released. Any ideas on where i went wrong?? Thanks: RJ

thank you. cant wait!!

thomas i ordered a smooth silver knob on Feb 10. did you receive it Thanks Randy