brianas

same

anyway i can use my ipod photo with a newer avic model? or any newer dock accessory? unfortunately works in none of the 5 dock accesories ive got, 3 being pioneer units- not sure why exactly,as it came with a usb cable, but i just get an error msg on the ipods screen or a not supported on the accessories screen the last unit i had that it worked with was a d3, long gone unfortunately

ive found the original n1 unit to have been the most accurate over the years, the rest ive sold and installed over the years have all had this annoying little issue some ahead and most behind it was also the most expensive probably just a fluke oh well, like others said u will get used to it

one thing - be sure your ipod is compatible with the f series and cd-i230v cable connection, b4 buying the cableing it seems most older ipods are not compatible from pio web NOT Compatible > iPod (1G, 2G, 3G, 4G) > iPod Photo > iPod Mini (1G, 2G) > iPod Shuffle

forgot to post back on this one, never found the VSS , apparently things changed for wiring for 07 --rev found as posted- thanks the sub dash must be trimmed down on the vans radio opening to fit dbldin also i had to fab brackets to mount the unit- there is no factory brackets or anything in there- its just empty and wide open thanks Josh

thanks alot, the VSS was right at the cluster-made it much easier. had to get the REV at the fuse blk under rear seat. suprised i couldnt find the REV up front any where- yes i did need to trim that brkt support for the factory radio easy one - for once - took 30 secs with dremmel the fit and finish with the metrakit to chevy was really not the greatest- but that seems common on the gms thanks Josh

Hello, looking for VSS and reverse wires on 2002 chevy trailblazer also , is there a DblDin install kit needed for this vehicle? thanks Josh

ok thanks for the info, have you put a dbl din in a ford van yet? thanks Josh

need vss wire, reverse wire thanks

check here http://www.bestkits.com/SearchResults.a ... 20-%202004 i havent installed this kit myself--but it does list your application Josh

components connected thru the ip bus system are controlled on/off by the headunit on/off even though connected to constant 12v+ its not always on

dont mean to hijack thread misfit is the free cam nd-bc2 thru CF part of a current promotion thru pioneer? i have not been notified of any such promotion--so im guessing its on their own. it is kinda redicoulos these prices\ considering that crutchfield is most likely a volume dealer and getting 5% lower than dealer cost. #'s dont add up im gonna ask pio rep tomorrow Josh

i think dvd video playback is really the bottom line if you want dvd video get the d3 if not then get the d2 on a lesser note--the d3 has exceptional ipod control g/l josh

recommend running a common ground for that equipment to a near by frame or other such location. I ve never had a problem running a few small components(head unit+sat+ipodetc...)off of the 12v+in the factory harnes---but if i am running more than just a few or its a top end install-I will rrun a seperate fused 12ga. from the battery. g/l I know all the wiring gets overwhelming--i usaully will build a harness on the work bench --as far as i can go then put it in the vehicle

http://scosche.com/scosche_caraudio.asp ... ID=FD1330B your truck is listed here--so it should fit ITEM | WIRE COLOR |POL| WIRE LOCATION | | 12V|yellow |+ |ignition harness | | STARTER|red/lt. blue |+ |ignition harness | | IGNITION|lt. green/purple |+ |ignition harness | | ACCESSORY|gray/yellow |+ |ignition harness | | SECOND ACCESSORY|black/lt. green |+ |ignition harness | | POWER LOCK|pink/yellow |- |driv