kware1
Members-
Content Count
13 -
Joined
-
Last visited
About kware1
-
Rank
-
Hello gang First off, its been a little confusing reading about how to bypass the X-930BT. Some posts say move the wire up on slot, some say move it down, others say move it to the right. Is it more than one way? Secondly, what I did was move the yellow/black wire one slot above/below depending on how you hold it. I also have the green parking wire grounded. What I'm getting is an "Att" notice on the screen and I lose volume control. When I reomoved the yellow/black wire, it went away. What makes this more a mystery for me is the fact that previously I had the D-1, D-2, and D-3 in
-
Thank you. The system is set to blue tooth. it will work via blue tooth audio and phone. the reason I bought this unit was because I wanted to have full control of Pandora on my screen.
-
Hello Folks- I need a difinitive answer on whether or not my Galaxy S3 and Pioneer Avic X-940BT can communicate and control Pandora and Aha Radio via the Pioneer interface. This is an update from the 930BT, so I don't know if that's where my issue lies. The Blue Toothe, phone contacts and everything else works fine but the Pandora and Aha Radio just wont connect.
-
I had a non-pioneer camera hooked up but it never worked im drive mode. I had a shop hook it up so I assume it was done correctly since its only power, ground, rca. But in map view it never worked. Any suggestions o nm what went wrong?
-
Hey, does anybody out there have original Pioneer power and rca harness for Avic D3 for sale?
-
I've been trying to hook up this D3 I purchased without wire harnesses. the harness I bought doesn't have a speed sensor wire. I actually have one from my old D2, but I don't which slot it would go in on the d3 harness. does anyone have a pic or diagram of a d3 harness showing the location of the speed seed sensor wire?
-
I purchased an Avic D3 recently which came with no connectors. I purchased a connector off Ebay but there are no VSS, parking, and reverse leads. I can salvage them from my old D2, but where do they go? there are a couple of open slots but I dont what would where. Any help?
-
Okay. The D3 came today. I just tried to connect the D2 wiring but it didn't work. The speaker harness is the same, but the power harness is slightly different. Fortunately I found a harness on Ebay.
-
okay thanks. so my plan is to try and get harness then splice it.into the existing wiring. does that sound feasible?
-
thanks. the unit came with no harnesses. I was taking a chance that my current harnesses would plug right in. but the wiring must be the same right?
-
I have the opportunity to get a D3 off Ebay for a good price. The catch is there are no cables or wire harness. I currently have a D2 installed. Can just swap the D3 in using the same harness from the D2?
-
Hey. I would like someone to create a background/loading screen from my design. I'm experienced in photoshop and can set up the design to your specs. Willing to pay a reasonable fee. Thanks.
-
Isn't the D1 supposed to have a menu option to show half rear view/half map view? When I go to that option, I get half blank and half map view.