enkrypt3d
Members-
Content Count
92 -
Joined
-
Last visited
About enkrypt3d
-
Rank
Member
Profile Information
-
Gender
Not Telling
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
Well it's not as easy as your regular camery. I have it in an Acura NSX and removing the head unit requires special skills without damaging the fragile console....... Should there be any special wiring other than the camera going to the reverse light's positive & negative wires? The camera only comes on part of the time.....
-
yep tried ground and battery with no change. I've also tried all the other options. And I reinstalled the firmware. The unit still starts with a black screen. Makes no sense. Maybe I should try pulling the battery?
-
Ok thanks guys for the help.
-
All the main links in the OP are dead. Any updates? What is the latest with this post?
- 718 replies
-
Anyone?
-
Hey guys I have a 6000NEX and every time I start the car, it starts in the rear view camera mode, but the camera is not on, just the message that says "image may appear reversed" and the rest of the screen is black. The only way to exit this screen is to hold the map button. There is no X on the top right of the screen. Anyone know how to fix this? I've looked through all the settings and cant find it.... Also I have a 2nd screen that is set to video out, is there a way to use the 2nd screen for a rear view "mirror" mode by the camera and have the main screen the navi etc? thanks!
-
Dude u dont have to take it out of the dash - just reinstall the OS - in WinCE - Start > Settings > control panel > storage > format partition and then copy new files (when u format u are blowing it all away including POI's maps etc and the entire OS so reload it w/ 4.01. and ur done
-
AVIC-F900BT System starting up..please wait
enkrypt3d replied to FrankV6's topic in Problems/Troubleshooting
Make sure there is nothing plugged into the unit when you are doing this stuff. I had this problem when i had my 64GB USB drive plugged in.... even when I try to start it up with it plugged in, it takes a lot longer for the unit to start.. but if I unplug it the system starts faster. HTH! Thx -
Feel free to post my link in your original post thanks!
-
http://avic411.com/index.php?/topic/22876-fresh-30-install-on-f90bt-with-pictures/ Guide...... pretty easy to find..... I've used 4.01 and it works great here is my mirror....... http://www.enkrypted.com/4.01.zip DL this for 4.01 upgrade. Be sure to update WinCE the same way as the guide says above.
-
Feel free to post these on the original thread (my mirrors) Thanks!
-
I was on 2.0 when the rebooting problem happened... then I copied 3.0 over 2.0 and it worked so I went and updated winCE for 4.0 then updated to 4.0..... works great! http://www.enkrypted.com/Avic_Files.zip Here is a mirror for the torrent file that I posted for everyone to share. Hope this helps thx
-
http://www.enkrypted.com/4.01.zip Here is a complete 4.01 upgrade package.... you really dont need anything else.... update WinCE and then install this the usual way. Includes latest maps & 3d buildings... for North America. Thx enjoy.
-
F900BT reboots over and over - Very weird - HELP!!
enkrypt3d replied to impulsive.ca's topic in Problems/Troubleshooting
Its caused by software corruption guys not a hardware problem - http://www.enkrypted.com/4.01.zip Unzip this to an SD - update WinCE (Format) then copy the files from the SD to the my flash disk....... hold the reboot button for 5 seconds then you're all set. 4.01 rocks!