Jump to content
AVIC411.com

nguyenphananh

Members
  • Content Count

    45
  • Joined

  • Last visited

About nguyenphananh

  • Rank
    Member
  1. Hi, does any one know where I can download ADDITIONAL night map colors/themes for the 8200 nex?? I dont like the pre installed map colors. Most of the map (night color) are grey instead of black. The theme "clovis (or jovis....something like that)" has a black background, but the streets are intense blue, which cause eyes strain at night. In the old F90/900 series, there are many map colors/themes for download, and this forum even have additional themes/mods for the map. Please help if you know anything regarding this issue.
  2. it wired correctly, but when the headlamps turn on, it only "dimmed", not turn to night mode. From mine research, this unit doesnt have the light sensor built in, so it only switch mode according to the clock
  3. I just installed a avic8200. Still getting to know the unit. I have a question regarding the function and setting for the gps system. I have an older avic f500bt (portable gps), and also on many OEM gps systems, when I drove into the dark tunnels (during daytime), or at night, the map display (and all the displays) will automatically switch to night mode due to the built in light sensors. Does the 8200nex has built in sensors?? would the display turn into night mode?? (I didnt see it so far). I didnt see any setting regarding this function!! So far I sat in the dark garage during the dayt
  4. Hi, I have this exactly car (red slk)... can you please redit your name out.... thank you...
  5. any body?? I assumed the f500 is the same as the 700, 900, 910... anyone have any ideal how to do this??
  6. wow.. nobody check out this site any more??
  7. Hi, I have a F500 and did all the mode many years ago. My friend just bought a used F500 which never been upgraded (map 1.00600, firmware 2.00.. something like that)... My question is can I duplicate my F500 into my friend F500 by 1. Copy everything on the hard drive of my F500 and copy into my friend hard drive's ?? will that upgrade both firmware and map (per my gps) 2. or do I have to upgrade my friend firmware to 3.xx first, then copy the my entitle hard drive to his?? 3. I have the official update disk from Pioneer (two SD card) 3.xx for my f500... can I use the 1st sd
  8. Hi, I have a F500 and did all the mode many years ago. My friend just bought a used F500 which never been upgraded (map 1.00600, firmware 2.00.. something like that)... My question is can I duplicate my F500 into my friend F500 by 1. Copy everything on the hard drive of my F500 and copy into my friend hard drive's ?? will that upgrade both firmware and map (per my gps) 2. or do I have to upgrade my friend firmware to 3.xx first, then copy the my entitle hard drive to his?? 3. I have the official update disk from Pioneer (two SD card) 3.xx for my f500... can I use the 1st sd card to upg
  9. Can you post the BMP from your mode? there are so many modes here... there are so many modes on this sites, not sure which one is which one...
  10. Hi can you please post the code here? I want to do this mode too. THank you
  11. Hi IDT can you please post the codes, and procedures to do: 1. road blocking 2. snap to road option 3. building setting Thank you in advance. The reason I ask cuz I want to keep Pioneer original look, just add a fews of these mode. Thank you that's going to be too much work on my side though, currently i'm working pretty much double shifts 7 days a week and having a very little time to mod my unit, what i would suggest is to trace everything back, from variables to scripts to bmp's, once i save up enough money i'm going back to just working 8 hr shifts then i'll be more th
  12. Hi IDT can you please post the codes, and procedures to do: 1. road blocking 2. snap to road option 3. building setting Thank you in advance. The reason I ask cuz I want to keep Pioneer original look, just add a fews of these mode. Thank you
  13. Where can I find this value? I also wanted to increase the title level.... I've been checking sys.txt file, but couldnt find this line.... Please let me know which files I need to check to change this value, thank you
  14. It's clip_planes.ini THANK YOU BORIS, you da man That's works. It should be INI file-type, not UI. Thanks again everybody. You guy are amazing....
  15. that is odd. I tried both and it didnt work. Let see If I did it correct: I opened the DATA.Zip > COMMON FOLDER, then imported the cilp_plan.txt file (downloaded it as txt file), then remaned into UI type file? Im missing anything? Also, do I need to change anything in sys.txt file? and do I need to add both this file, and change the numbers in the color3d.ini? or just this file only. I so far sucessed at all these other mods, this one is the first one that didnt work out for me
×
×
  • Create New...