urtruelove78

Anyone have working link for Older Units?

With Appradio mode enabled Bluetooth streaming doesn't work. I Learned it hard way. If you want Bluetooth Streaming then you have to disable Appradio mode. First Point in Important section of your firmware update instruction. Click on following image for highlighted text.

Can we get rid of these new guide lines? My camera bought from ebay already have it and now it displays 2 set of lines. On other car which has ccd camera and no lines, I like that they introduced this and it's configurable. Just don't know how to disable them.

Ok. May be I was thinking it wrong. When it upgraded version is 5.000 but application version is 5.100 5.1 update says to check for uboot version 8.05 or earlier but after upgrade to 5 version my uboot version is 8.12 hence it does not update. All 5.1 changes are verified like camera lines and appradio. Also removed nag screen which I was looking forward to.

Thank you. I will give it a shot again removing Testmode.key

How did you apply 5.1 on z110? I tried and it failed on me. I can see 2 options from SD or USB and sys or sys all but it doesn't do anything when i press menu to enter to select from SD.

I upgraded my z110 to z140 using latest 2013 map update and it is now on version 5. When i tried 5.1 update from pioneer website, its not upgrading unit. Am i missing something. Or 5.1 is only for Z140bh and z110 can't be upgraded to it?

What's Patch offset for 5.1. It's done in navi.exe correct??

If those trees look like that at night then it's normal else not.

If you are trying to get voltage from tail light to power backup camera then it's not ideal solution as different vehicles have different voltages based on tail lights. Better aproach is to run dedicated cable from switched +12v and negative to power backup camera. Then run another cable that you can connect with tail light or reverse cable to trigger headunit to recognise and switch on reverse mode. One another advantage of this approach is you can have your camera always running with car and put your unit in reverse mode to see people behind you. Cable to I used to run all this....Eth

Firmware 4.0 is not compatible with f500bt. Even if you manually put maps files in it. It will not respond after you reboot unit. If anyone successfully updated f500bt with 4.0 firmware then give us steps.

I'm having same issue as yours. I think it's hardware problem and not software. I have 2 of these units and both are having touch screen issues after 3-4 years. One of them does exactly like yours. Other one only takes one touch at a time and then for 5 minutes won't notice touch, eventhough map and menu button always works. I tried software reset, Win CE flash and reset. Screen calibration from gui as well as win ce. Also tried manually keying in F500BT registry values as 506,504 730,356 727,652 285,652 281,357 None of them helping. Only thing remaining to test is downgrade to fir

To wrap this topic, I took a plunge yesterday and changed both units in my car. Power harness is same for both unit, Only rca harness is different. I show that z140 unit came with bypassed harness and only thing I have to change is cut parking brake cable from old rca harness and replace it with z140 rca harness parking brake cable. I tested bypass as well as HD radio and traffic confirmed working. Initial impression handling both units, z140 looks like cheaply made unit then z110, button feels cheap as well as overall build quality of unit.

Hello All, After Long time active on avic411 as need help for following. I installed Z110 (Upgraded over the years to z130 using this forum) in 2009 and recently stumbled upon really good deal for Z140bh which i could not pass (It was that Great). So I grabbed it even though Not needed. Question is: Can i just use existing Z110 bypassed wire harness with Z140bh as I already have system setup with pac and everything. I searched forum and show that Z130 harness is same as z140, so Is z130 wire harness same as z110. Looked on ebay and one guy is selling harness which he says compati

If you use f500bt wiring harness there is connection for audio out which will work with aux or line in on your factory stereo. That's how mine is connected.