Jump to content
AVIC411.com

Jfinley0

Members
  • Content Count

    226
  • Joined

  • Last visited

About Jfinley0

  • Rank
    Member

Profile Information

  • Gender
    Male
  • Location
    Shoreview, Minnesota USA
  1. It seems like when I updated to FW 1.08, the problem with the keyboard started. I did not have any problems before that time. I have dealt Pioneer in the past and that is thier standard response everytime something is not working. Jim
  2. Did not fixed the problem. I also did a hard reboot by taking the fuse out for the HU but no luck.
  3. I had the same problem the other day. It would be ok and then the map would locked up and then work again. Never had this problem util after doing both updates. Not sure if it is related to that. Jimbo
  4. Pioneer told my to do a system reset under settings. I will let you know if this fixed the problem.
  5. I have had the same problem with the keyboard after doing both updates. I will contact Pioneer for the same problem today. Jimbo
  6. Nex 8000 8.02 upgrade and everything works fine.
  7. Thanks. I was going to take out the HU and put a different USB cable in. You saved me time!! JImbo
  8. I am getting the message (Incompatible USB cable). But the funny thing is the AppRadio still works when I switched to Digital AV. I switched to a different Lighting cable that I know works and same message. Do I need to change out the USB cable on USB 1. USB2 and USB1 works fine when I change the settings to USB instead of Digital AV. Your thoughts? Jimbo
  9. I just upgraded from Avic 950 to 8000 Nex and the power wiring harness I used from the 950 worked.
  10. $980 for the Nex 8000 thru Amazon. Havent got it yet but am excited to have it installed.
  11. You are welcome! I spent hours trying to fix the problem including deleting and reinstalling all the files. Great job figuring it out! I did have the no nag on there but i cleared it out before sending off the 940 to you. Now I got the x-950 and I can't do anything even with the testmode! Thanks Jimbo
  12. I am going from x-940 to x-950 and the power harness is different. I can still use the same rearview camera and XM tuner. So i hoe that answer this for you
  13. I did the firmware upgrade and I screwed up. I tried doing it again and I get an error message at about the 30% saying (Upgrade failed) Anybody know how I can do the firmware upgrade again? It says my application is 4.6 and ucom is 8.05 whiwch means most of it was upgraded. I need to do it again because my nav screen is orange and it has something to do with the new backup image that is dark and there are 3 colors of lines showing (red, Orange and yellow) when I go into reverse mode from NAv to backup that shows for a split second and same thing when i go from reverse to forward. Any help w
  14. Hi all: I was messing around with my x-940 and decided to updgrade to 4.6. When everything was done, I open my navagation and I have orange background on the map screen!!! I then tried to run 4.6 and 5.1 from Pioneer wedsite and I get error message at about 30% complete. I think due to already upgraded to 8.05 com. I used micro SD to do the up grade. I deleted everything and re-installed my PRG0 and PRG1 and Nand2 but still get the orange screen on map. Any ideas out there to how to fix this? Thanks Jimbo
×
×
  • Create New...