4x4freak

first off yes it will be different from speaker to speaker and person to person. I have not yet found my perfect setting. My set up is D3, Kicker DS68 door speakers with kenwood 4X40rms amp, Two 10" Kicker CVRs under the back seat running them at 4OHMs with a Rockforfosgate 325.1 @ 400RMS@2 OHMS My settings are HPF on at 120 i think Music EQs are Low-80Hz-+4dB-Q Wide2 Mid-1KHz-+6dB-Q Wide2 High-10KHz-+6dB-Q Wide1

heres mine in my lifted 2001 F150

here is mine in my lifted 2001 F150

my D3 wont tell me if my xms signals strength and if it is connected or not. The XM works.

can you burn it with a normal cd burner or do you need a dvd burner?

I had to cut the upper part of the din and the back. it is a snug clean fit. http://fordtruckworld.tenmagazines.com/ ... 729997.jpg http://fordtruckworld.tenmagazines.com/ ... 729998.jpg

How do you copy a D3 navigation disc? My friend tried to copy it but couldent. I am not going to sell them but i am going to use it as a back up disc.

I dident connect mine. in the D3 you can manually turn on the back up camera.

worked for me.

I PMed you.

I got a 95-5026 that crutchfield sent me will this work for my 2001 f150 crewcab? its for a d3.

All right thanks!! because i am looking to install my D3 Friday when it gets in.

I am about to install my D3 when it gets in Friday. Did you ever get any pics? What did you need to cut? What color wires where the speed/reverse wires?

What do i need to cut inorder for it to fit in a 2001 F150 supercrew 4x4? also what color and where are the reversegear signal input wires and the speed signal wires? and the parking breakpower lead?

OK crutchfield has them is stock!!!!