Jump to content
AVIC411.com

touche6784

Members
  • Content Count

    79
  • Joined

  • Last visited

About touche6784

  • Rank
    Member
  1. The Elite line is very good... Their Blu-Ray players are over priced and underwhelming... I don't care much for the sound of the elite series. They look sexy without a doubt and they are packed with features but their sound falls pretty short of the price you pay. Maybe this re-dedication to their roots will improve their home and car audio products.
  2. Check your parking break wire. If it is not grounded I don't think alot of options show up.
  3. Depends on what version firmware you have. 2.0 does not have the a mode to allow for direction of travel as always up. 3.XX has three map modes one of them being direction of travel up.
  4. I have tried asking about this before and got no answers. Either no no one knows beyond what you have found or no one cares enough to put their experiences in. Either way I got no answer either.
  5. So nobody has any ideas? I'm sure it can be done. Please someone help?
  6. Touch screen does not work so a keyboard on the touchscreen would not work. Thanks though.
  7. Is there anyway to have drivers for a keyboard loaded on to WinCE when testmode boots up? I realize that there are no drivers to begin with but I am curious to know if it is possible. I ask because I had to get my F7010BT sent out to get the screen fixed from a non-responsive screen. I got it back with comments from the repair site that nothing was found to be wrong but they calibrated it anyway. When I booted the unit up it worked for about 10 seconds and then the screen stopped responding. I have a feeling that it is a set of modded files that I loaded that is causing the problem. Any
  8. So I sent the unit out for warranty repair and just got it back. They say there was no problem, or so I believe as they had "NTF calibrated touch panel anyway" as the only comments on the packing list they sent back. It worked for about 10 seconds and then it stopped working I am going to try to mimic the length of time the unit was off before they got it to see if that suddenly makes the unit work. Any ideas?
  9. BBB is one of the most useless organizations in the US. If you really wanted to raise hairs I would take it to a state or federal agency that regulates businesses. They have the tendency to like taking on big companies. If you really want to stick it to Pioneer you can always contact The California Department of Consumer Affairs and file a formal complaint as the US office is headquartered in the LA area. http://www.dca.ca.gov/publications/cons ... help.shtml
  10. Thanks for the suggestion. It seems that that will not work as I can not hit the "OK" button to continue to the calibration screen. I will be calling the person I got the unit from to see where to go from here. Seems the unit is kaput.
  11. I have a question that needs answering though I am pretty sure I know the answer. The touchscreen on my F7010BT has crapped out and will not respond to anything. Even when in testmode I get no response. Now here is my question: Could mods and the illegitimate 3.xx update screw up the touchscreen? I would think that the touchscreen would be a WinCE thing but I need to make sure. Thanks guys.
  12. I have no clue if my current problem is related to this mod but has anyone had a problem with the touch screen not responding after putting this mod in? Front panel buttons work but my unit is also much slower in loading the menu or map. I got the touchscreen to work earlier today but it stopped working again. Could it be a defective unit?
  13. here you go http://avic411.com/forum/viewtopic.php?f=33&t=26396 Hey IDT or anyone else with know how in this, What do the values in the file mean? As stated in the thread you linked, I could not come up with any significant info.
×
×
  • Create New...