T-Shirt

All: Quick question; if anyone knows the answer it would be appreciated. I have an F700BT and the touchscreen stopped working after I upgraded it to 3.0, which I purchased from Crutchfield. Since I am no longer using the unit, can I sell the upgrade on eBay? I put in my device number and have the password, but am not sure if it will work on another unit with a different device ID. I know it is only for use on a single device, so if someone were to purchase it, that would still be the case, since mine is no longer in use. Does anyone know if this is the case? And if anyone is look

Thank you very much; I really appreciate it! One question: the extracted file has only one folder ("testmode") which I have put on the root of the SD card. Previously, there was a second folder ("Mitacap") Do I need both? Or do I just extract the testmode folder to the root and let it rip? Thanks Again!

All: I have upgraded to 3.02, but cannot seem to get into test mode, even with a freshly formatted SD card and the (2) test mode directories in the root--my system just boots normally. Am I missing something here? Any help would be appreciated! Best Regards, Michael Tschirret

All: I'm considering purchasing the 3.0 firmware upgrade (want to do it "by the book"), but am OK with the maps I have now...I am curious, does the 3.0 upgrade add any new functionality/fixes outside of the map changes? Any help would be greatly appreciated...Thank You!

All: Does anyone know if the software mod to enable video while moving will break when the 3.0 firmware upgrade is applied? In addition, how can I apply the mod if I have already upgraded to 2.008? If I simply edit the Pioneer.ini file and reinsert the SD card at system startup, will that do the trick? Any help would be greatly appreciated...Thank You!

All: First post; a lot of really great info here! I apologize, but I have searched high and low for info on whether I can revert back to 2.006 from 2.008 on my AVIC-F700BT. 2.006 was rock-solid for the most part; I upgraded to 2.008 a few days ago, and my touch screen just flat out refuses to work most of the time. I've tried a reset, reset-eject, and calibration of the screen to no avail. When the screen does work, if a press a "button" it either does not respond, lights up and then responds several seconds later, or gets stuck in a repeating fashion with no stopping...Is there an