Noel380
Members-
Content Count
19 -
Joined
-
Last visited
About Noel380
-
Rank
-
Did u remove the sd card after u did the upgrade? If u leave the sd card with the testmode file in., every time u boot up it will take u to the windows screen
-
Avic-F900BT wont boot,cant enter test mode.
Noel380 replied to ktulu909's topic in Problems/Troubleshooting
Thats exactly what my deck did, before i fixed it........ Are u sure your pushing all four buttons at the same time than after about 5 seconds only realese the reset and keep holding the other 3. -
When it says 100% wait a minute then itll say reset. Take a pen and push reset button and then itll boot up and take u to test mode.....
-
3.0 Update, frozen after selecting language
Noel380 replied to BNef's topic in Problems/Troubleshooting
Try it again for some odd reason i did and it worked -
Imo these avic f are JUNK..... but if u cant afford one now they must be fixed. But if u do, NEVER EVER A PIONEER
-
This shoild do the trick same thing happened with mine this fix will update u to 3.0 solve lag issues and read directions carefully and u should be up and running click the link: http://avic411.com/index.php?/topic/30828-boot-problemsblack-screen-fixrestore/
-
Avic-F900BT wont boot,cant enter test mode.
Noel380 replied to ktulu909's topic in Problems/Troubleshooting
And u can find all the files u need here: http://avic411.com/index.php?/topic/30828-boot-problemsblack-screen-fixrestore/ -
Hmm after it reads 100% itll take a minute or so then it will say RESET...... after u reset thats the step where u will need to go to test mode and rewrite the flash disk
-
Avic-F900BT wont boot,cant enter test mode.
Noel380 replied to ktulu909's topic in Problems/Troubleshooting
To enter service mode u press MENU,RESET,MAP AND EJECT when the screen goes black u release ONLY reset but keep holding MENU, MAP AND EJECT. That will take u to service mode NOT test mode....... To get to test mode u must download TESTMODE files to an sd card insert the sd card and it will automatically get u to test mode. -
Sorry i meant do not install sd card until after step 5, when u do step 6 u need to have the sd card in.
-
Remember do not install sd card until ufter step 6. Up until then leave it out..... Once u finish step 5 insert the sd card and leave it inserted until u are ready to reboot to 3.0 update basically leave it in until u are completely done with all the steps. Hope it works
-
Its the same f90bt and f900bt are basically the same unit....
-
Try this: http://avic411.com/index.php?/topic/30828-boot-problemsblack-screen-fixrestore/ This problem is common on the f series units...... Imo its a piece of junk get rid of it and buy a different brand (pioneer is junk/horrible customer support)