Jump to content
AVIC411.com

Amarillo6oh

Members
  • Content Count

    13
  • Joined

  • Last visited

About Amarillo6oh

  • Rank

  1. NEX-8200 Originally, I would get an incompatible USB message but now when I plug in my iPhone, it will go silent (playing Pandora via Bluetooth) AVICSYNC doesn't do anything either. I can't get the phone to connect to the unit, no matter what. HU is 1.04 and brand new I have tried a new pioneer lighting to USB, using an extension, NO extension (plugged directly into the HU), different HDMI cables, different Apple dongles (HDMI/ lightning) Has ANYONE ran into this and figured this out?? Thanks
  2. Mine is not recognizing the USB either - iPhone 7 Has anyone come up with a solution?
  3. NO. It doesn't work at all, plugged directly into the HU I ordered a replacement.
  4. Yes No It just won't recognize the Pioneer USB cable - I have the cable you show but it's useless if it won't even recognize the Pioneer cable.
  5. The Pioneer CD-IU52 usb cable is plugged directly into the back of the HU into USB 1 I read to try another USB cable but I eliminated that problem by going directly into the head unit. Has anyone had an issue with the Pioneer cable? I have done a reset on the unit as well as rebooting the phone. I have also tried 3 different Apple HDMI/ lightning plugs iPhone 7 - iOS 10.3.2
  6. Deleted - not sure on how to remove it
  7. I have been out of the scene for a while and I'm looking to upgrade my AVIC Z3 head unit. Can I get some reviews and comments on this unit before I spend a lot of coin? Are there any reputable places to purchase at a good price too? Thanks!
  8. I have no experience with Porsches. I would guess thatis is a data bus type system. You could just call you local car stereo shop and tell them what you are looking for and they may be able to help you. Good luck.
  9. You are right about it being annoying to go from Accessory to Starting the vehicle and the HU rebooting, that is what I was referring to. The mod is not vehcile specific. Every vehicle (except below) has a "True Ignition" circuit in the ignition harness which usually doesn't drop below 9 volts during the start cycle. If it drops to ZERO, keep looking. You should NOT need to do this to the yellow or hot wire for the HU. It should not drop out during start. If it did, all head units would lose thier station presets and clock memory. The whole reason for your radio (heater, A/C, lights, etc) to "
  10. I found it quite annoying that the system would reboot every time I needed to start my truck. All you need to do is add a fused 12 volt wire from your "True Ignition" circuit from you ignition harness WITH a diode, right into the red switched wire on the head unit. Have the band of the diode going towards the head unit - VELLA !! The diode blocks the 12 volts from feeding back into the Ignitoin circuit, when you have your key in the Accessory posistion. You should be able to find them at Radio Shack of maybe a car audio shop will give you one! True Igniton = 12 volts does not dro
×
×
  • Create New...