F310

Here is the testmode for U310 and F310 ( i tried on my F310BT and it works) - It will allow you to load wince 6.0. I tried to launch iGo and it works ( just have some problems with gps... but have no time to fix it) http://avic411.com/index.php?app=core&module=attach&section=attach&attach_id=14678

Give me your emai I'll send it to you

Can anyone help me with alternative menu for F310BT? I have got a full access to the device ( testmode). So just neet to install the software I need ( nav menu and iGo for example)

http://www.gpsmeter.com/index.php?page=portsplitter - this should make our device see the gps port

Try asking from F series forum. Seems like they are able to help us

I tried to run Navitel - it works but doesn't see gps port too ( Seems like I have seen the solution somewhere... will keep looking for it)

Can you tell me the way you have installed alternative menu? ( with files if possible)

Great it works Now It is time to think about alternative navigation software and top menu Does anyone have an idea?

I will try it

Does anyone know what is pioneer ID file? It is required to initiate the testmode start for AVIC F310BT ( or U310BT for US)

Any ideas how to get the ID file?

Tried testmode 2.3.... no success again.

Ok, I'll try

Look what I've found in service manual for F310 U310: How to Use TestMode Jig No: GGV1345 Startup procedures 1. Store the TestMode folder that can be found inside the TestMode folder on GGV1345 to directly below the SD card. Note : “ Test Mode †folder must be on the SD card root. 2. Download a ID file from the Service Site and copy the file to the “ Test Mode†folder on the SD card. 3. Attach the PND into which the SD card containing the program has been inserted to the main unit. 4. Turn ON the BUP and ACC of the main unit. 5. Press the Reset button. 6. TestMode w

I tried it with no success. I unpack the files to my SD card and then insert it into F310BT.....and nothing happens. Any ideas?