Jump to content
AVIC411.com

Sammythebu11

Members
  • Content Count

    5
  • Joined

  • Last visited

About Sammythebu11

  • Rank

  1. Awesome, thanks, I didn't know that. I figured it would stop automatically when I arrived. it does say "Arrived at Destination" and I figured navigation would stop once it realized it arrived. I talked to Pioneer and they didn't know that you had to stop it yourself, they also thought it would stop on it's own. thanks a lot for your replies, Sam
  2. I have 2 AVIC-6000NEX units and neither of them stop navigation after I arrive to my destination. if I drive past the destination, it keeps tryinh to re-route me back to the point. I have performed all three resets (with the pin, reset all and factory reset) with the same result, has anyone else seen the same behaviour? do I have two bad units? is there a way to fix this? thanks in advance, Sam
  3. I had this same camera working with the previous stereo. I didn't change the connection to the camera, I just plugged the RCA to the brown connector on the 6000, connected the reverse to the pink wire (i think), when I go into reverse, the receiver switches to camera mode, so I know that connection is good.
  4. Sorry, i've been out of town, yes to on for the camera and battery on the polarity. I think I found the problem with the AM reception, it was the blue/white cable that says auto (i think), plugged it in to the blue in my harness and everything worked. thanks, Sam
  5. Hi, I just installed an AVIC-6000NEX in my toyota sequoia 08 and I am having a couple of problems. maybe one of you can help me. I thank you in advance.... I replaced a Jensen VM9424 that had the camera and the AM radio working just fine. my problems are: I only get a black image from the camera, the camera is connected to the brown connector in the back of the unit, not the hanging yellow one that also says camera. I have tried three different cameras two that I know work and a new one I just bought of ebay to test. I know I am getting voltage to the purple wire that says reve
×
×
  • Create New...