FransdV
Members-
Content Count
10 -
Joined
-
Last visited
About FransdV
-
Rank
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
Used the quotes before and after the pw, did see others get that wrong Hopefully for me it is a combination of ffing around too much with the cif file and using cheap chinese sd knock off cards. Will go and get a real SD tomorrow and start fresh, now read up on shortfuse's post how I can get out of the update loop. thanks sofar for the great help! UPDATE: recovered boot via supertestmode, happy! Will attempt upgrade again when I have a new SD card
-
Thanks for the quick reply! Only have a 4Gb and a 32Gb one to try, will try on the 32Gb one.....hopefully I have more succes. I trust the original files from godzilla's zip are fine for the F920BT and need no altering. The initial string in my cardinfo was (i believe) #PioneerEL4YD12 Have tried other cardinfo.cif files without succes. Will keep you posted
-
Judging by your nickname your are from the UK?.... If so you can run the upgrade procedure as detailed here: http://avic411.com/index.php?/topic/35601-cnsd-310fm-eu-2012-update/ I also did this on my 920BT and have now happily upgraded to the latest maps and firmware, and yes Apple iPhone will play with it. Good luck!
-
Anything f920bt related is pretty much dead on this forum, don't expect replies
-
I have the same on my unit, f920bt. Installed it in my wife's car, Daihatsu Sirion 2, old original radio had perfect fm reception. Antenna is a passive one, so no amp that needs a power lead. Antenna connector is seated fine, making good contact..... Also a bad unit?
-
I have the same poor FM reception, the original radio did not provide power to the antenna by the way.... Have played around with all the nice settings for near/far stations, nothing helps...
-
I have similar problems, gps position being completely off. Except at hone when I installed it first time, it found the coordinates, 20m off by the way. Does the auto calibration gyro thing help to get matters sorted? I resetted this cal. setting and looks like it needs to learn now. First spin around the block showed me driving through the neighbours houses then ended up in a field.... Could it be I need the metallic sheet under the gps aerial, it is mounted just two cm above the f920BT unit, hoped this would be enough shielding. In my setup I haven't connected the speed pulse by the w