mrbombastic

Yes, This will work no problem.(I have this working in my car).

SWDW can you check the original disk and tell me what is the volume name and total size ?. Thanks this will eliminate some of the confusion.

Mine works fine, set to IP Bus your video output comes from the osd rca going to the D2 AV-Bus, you need to use 3-pin on the AV Bus. Pin 1 = Video Ground Pin 2 = Composite Input from OSD RCA Connector center pin. Pin 12 = AV ON INPUT needs to go to +12V. The 12V input tells the AVIC to turn on the AV-Bus input.

Wastedtime did you try this yet does it work? I also ordered the bypass module from ebay.

Thanks for the response. Do you know if the CD-RGB600 comes with a AVD W6210 touch screen?

I Try to purchase a avd w6210 touch screen for my avic9 but the sale person told me it would not work because the touch screen is 26pin and the avic9 has a 20 pin connector. Can anyone tell me if this possible and what is needed for the w6210 to work on my avic9. I am currently using remote with non touch screen. Thanks.

For remote control the lastest pioneer software is cndv40R if you use cndv50 you must have a touch screen. However if you need the 2006 map update for remote operation PM me.

Any body know what is the difference between cndv60 1.0 and 1.03 is this a map update?