Jump to content
AVIC411.com

codmyster

Members
  • Content Count

    14
  • Joined

  • Last visited

About codmyster

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have a AVIC-F700BT-XS and it will light up the screen see the usb in the slot will not eject or will not accept a disc then in less then 30 seconds all that works is the fan in the back no screen, no power to the buttons, no eject, all that seems to work is the fan it like boots no words on screen just the blue factory back ground color blue then like I said 30 seconds or less and nothing like powers down, all but the fan in the back of unit, also had a hum if I touch a rca connector to the frame of the unit firmly its stops humming. Please help which board do I need to look at replace
  2. hey guys real quick can I get my AVIC-X920BT to except A AVIC-F900BT face will they work im getting the zebra screen then black then lock down.. Please help me master of the avic411 world of guru's Please help help help GOD BLESS Codmyster
  3. all you need to do my friend go to any auto store advanced auto zone and buy cheap TEST LIGHT 12 volt circuit tester and clip the to a ground surface make it secure champ on good and then turn on the key to the first or second click then take the test light gently in the back of the factory plug harness finds the wire that only lights when that key is on only not on all the time that's +12 volts You want acc 12 volts the one or 2 clicks with the key like said earlier then I like to use quick disconnect male and female spade connectors you can get the red or pink color ones they are usual
  4. did u try and holding reset for 20 seconds or so then make sure to see of u need a new firmware update seems like maybe a boot problem but that flashing could be something may not be hooked up wrong or not a good enough ground make sure all connects are good and properly install correctly and grounds are solid and to a firm surface clear of any rust corrasion etc. if this is no help repair time take it out and bring to a repair shop and maybe try to get someone u know and trust who is electronic component level repair tech and see what they can see what's up. I hope this help
  5. Silly I know but did you try and hold reset down for like 20 seconds or more to force the micro processor to clear everything in its path. Simple and if u tried no foul just putting it out there I hope this helped GOD BLESS CODMYSTER
  6. did you make sure you have to tell it a positive or neg switch type how ever its hooked up and make sure in your system setting you will see polarity + or - so make sure how ever yours is connected its on the correct settings!!!! hope this helps GOD BLESS Codmyster
  7. it may be also of the level of the recording the mp3,wma,cda,etc. was recorded at the level that is a lot people don't understand and jack up the level a bit much and that will clip the preamp signal every time there for its always good to make sure its all flat when your making the recording you can always pre record and set your setting accordingly so your signal is not clip when your volume is on 23 when your HU is able to go to 45,50, etc. hope this helps some what can yall by the way look at mine and answer any one I got f900bt face and can it work on my x920bt. I got them da
  8. I am not sure if this will help or you tried this already but you need to go to menu or setting what ever on your unit and go to system and look for av1 av2 put them both on you may have like ext, for external, and they have video, ipod, and I think theres one other setting you can do then try going thur the front 3.5mm port again and mess around with them settings. Also if you do a hard reset hold it in for 10 seconds or more, then there should be a setting in the menu or setting section called in initial settings and you get more ones only at the hard or full reset setting o
  9. Here Is A fast And very simple try and maybe it will help you sounds like u may have a bad resistor plug makes what we call computer lash a installers slang but here's the fix try and take a alligator clip and take one end and clip it to any RCA connector coming out of the head unit then take the other end of the clip and clamp clip it to some where on the back of the head unit, ALSO take a lead to a ground point isolated from the head unit, then I want to try and run lead to amp ground, R.C.A. etc. If this is no help worse even try replacing your SPARKS PLUGS. I hope this hel
  10. I am not sure my friend if you have access to any other plugs maybe laying around easy, easy fix all you need is a tiny, tiny flat head screwdriver very, very gently lift the little white plastic tab there remove a wire you don't need or if you have no access to plug with the pins in them you can find them online and you will have to make it your self, anyway lift the little white tab remove the wire you require to fix your missing plug wire in your 16 pin plug or what ever harness the reverse is in and gently side it in you will see a little like spike metal piece sticking out
  11. avic-f900bt face will it work on a avic-X920bt? if not I got these zebra like stripes then the screen goes black no video I cant hear no audio lights on side of deck but nothing else no reset button no where on here I didn't read no update software for this problem can I just replace the face and will it fix the problem or is it more intense problem inside the unit itself deeper. Can someone please steer me in the right area as what to do please guys I really need any and all of you all's expert advice and help im so screwed here as what to do.. First thing first will the f900bt
  12. eOk Gentlemen here is your one and only free laugh on me,to get your cracks in insults what ever i deserve it all problems are fixed accept the nav app disc asking for.But heres what happened the BYPASS was already done to it dont ask me how or why or who but the one owner who bought it for 1234 dollars back a few years ago had it installed at a circuit city or so i was told maybe comapny no worries.Well he didnt have nothing done to it and then was sold to my brother thur a friend of the guy who had it so my BYPASS i DID I REVERSED EACH STEP AND GUESS WHAT PERFECT....So again thanks guys for
  13. From this web site of course where else hehe .. In this same forum.. Update gentlemen i got it off MUTE by unpluging the rca plug or removing the yellow/blk wire in the top slot it mutes it permiently.. un okuging or pulling the yellow/blk wire out get it off mute but here another kicker now we are also gettin the video cant play error mess. And its asking foir appoc disc when its been disc without power doesnt it want to see the disc once it pluged back up to power since it nots hardrive bases headunit.. Any help or comments is thanks in advanced gentlemen so thank you.. PLEASE
  14. Hello Gentlemen Ive been in and out of the forums and looking at all the possible things that may have helped before I beg for the gods in this channel to help me. Here my problem have a avic-d3 did the bypass it worked i thought.The nav section wants the app disc inserted and my brother has no remote so its stuck on Mute.I know i told him he must get a remote but heres another kicker the system today while he was driving said a error mess with the front seat viewing is prohibited mess. So i told him to do a hard boot on it and reset it and it seemed to have fixed that.. We took th
×
×
  • Create New...