milespjking

*update* I am using my jailbroken iphone 4 with my avic flawlessly I want to mirror my phone to the navigation and it works perfectly only one problem I've got here is iphone 4 is too laggy so I decided to use my iphone 5s and bought cd-iv202navi. unfortunately, I haven't found any way to work with it. However, today, I exprienced some strange behavior of my avic even though all the hassels i went through here http://avic411.com/index.php?/topic/81643-2015-avic-z120-map-update/?p=342370 except the initial try of getting it working, I haven't connected iv202na

I tried as RonS proposed but nothing worked so far I updated my unit to 6.0 then I figured there is no way I could install the "ipod settings" on the firmware when i tried it i was stuck in the "program foreced write" step. my ucom version was 8.12 and ucom version i got from the 5.1 firmware just showing me --.------ rather than 8.05 I tried formating my two different sd cards mutiple times but still. so i re install firmware 5.0 again. then I tried 5,1 firmware and it was looking good showing me copying some files as you updating firmware. until the "program forced write" step

I haven't tried it yet I will try it later in the day and get back to the forum

Thank you for the head up and I have sincere appreciation for your devotion to this forum the method you talking is this? http://avic411.com/index.php?/topic/81913-help-virgin-40-z140bh-upgraded-to-2015-maps-wo-iphone-fw-first/?p=337737

be careful if you want to use this update with cd-IV202NAVI for lightning cable connectivity don't update your unit with this map before you read chapter. 6 of this link http://www.navigation.com/is-bin/intershop.static/WFS/Navteq-Site/Navteq/en_GB/documents/Pioneer/Pioneer%2011-12%20High%202015%20Manual%20T1000-23348.pdf if your firmware is 4.0 then update it to 4.6 if your firmware is 5.0 then update it to 5.1 or you will never be able to get the menu "ipod settings" in your avic for fully functional iphone 5 or higher connection i updated my unit to firmware 6.0 without think

Dear Vinweasel. I am in S.Korea and using z110bt. let me know if there is something I can help.

nadnava read this post it might help you http://avic411.com/index.php?/topic/33505-jailbreak-appradio-appradio-plus/

this is how I run an alternative navigation on my z110bt (this link is not mine, I looked it up on the web) Ive tried Pioneerus but for me this is better off there is also a different way http://avic411.com/index.php?/topic/34188-appradio-extensions-20-beta-full-iphone-control/ worth to read good luck

yes it works in Window CE 6.0 I will look it up about ARM CPU frankly, I have no programming skill. I just took a C++ class in the college back in the days I am just googling everything now.

thank you for your attention but I dont think you ever heard of it. it is called "Mappy"

Ive just figured the problem 1 happens on and off anyway, I will use my nav system when my engine is turned on, it would not be a big deal and I got igo8.3 maps, just checked it Igo working good on pioneerus now, here's thing I am living in the country igo doesn't support and I have a local map, tried boot it up via pioneerus. I edited pioneerus.cfg by notepad to designate a folder to where the local nav program was. I have failed tho. can you give me tips for it?

I just reinstalled pioneerus now it works fine. Edit:at the first trial, it worked it was supposed to work at the second trial, I ran into the same problem as I mentioned in earlier post(problem 1) just wondering that when I tried to launch igo8 it just shows the booting screen of Igo8 and then goes off is it just because I dont have the map for igo8? I only have Igo8 files the developer sent to me (which does not have maps)

Thank you ver much!!! finally, I could get to the shell. here are problems tho. here is my procedure I went through Uninstalled pioneerus Installed CNSD-310FM for the firmware installed pioneerus put lic file into pioneerus folder problem 1 I can't get to the shell when the engine is of the car is off even tho I put electricity on in the car. when the engine is off, trying to get to the shell it just shows me black and white horizontal lines problem 2 I can't launch Igo8 ( Actually, I am not going to use Igo since in the country I am living in, igo doesn't support the m

I am on the way thank you very much

Hi there I have been lurking on the forum ever since I've got a z110bt unit. Ive been watching every single effort you members have made. I wish I could join you guys. I have no programming skill tho. I've found there is possibility to install 3rd party map into my unit decided to move my ass little bit for my unit I have unmodified z110bt with the firmware v 1.0000 now I got pioneerus and trying to install it into my unit but I can not get to pioneerus shell I have done everything accordingly. I got lic file into pioneerus folder then pushed home button, destination on the sc