Jump to content
AVIC411.com

vinz.93

Members
  • Content Count

    14
  • Joined

  • Last visited

About vinz.93

  • Rank

  1. Hi all, Could you lock this post because I've created it two times... Thanks a lot! A+
  2. Hi guys, Just looking about my problem, and you drive me in the right direction! The amp wire (from the car) wasn't connected to the head unit remote!!! Just have connected them and works fine!!! WHAT A BEASTLY SOUND!!!! lol Thanks again for your help!!! A+++
  3. Thanks guys... However, before this F310BT, I had installed in the same car, an AVIC-D3 and there was no problem with sound... The setup was the same (harness) and it worked good! I hope this is not a head unit problem!
  4. It's an Alfa Romeo 159 which is working in CAN... I have the good interface for Alfa & Pioneer... Thanks
  5. Hi guys, I've just installed a "new" AVIC F310BT in my car with specific cable! I've done de hack for handbrake (grounded on black wire), head unit still working but I've no sound... CD, MP3, radio, GPS, no sound!!! All navigation works, all menus are ok but no sound in the car... What's going on?? Could you help me! please!!!! Thanks a lot! Sincerely Vinz =)
  6. Hi guys, I've just installed a "new" AVIC F310BT in my car with specific cable! I've done de hack for handbrake (grounded on black wire), head unit still working but I've no sound... CD, MP3, radio, GPS, no sound!!! All navigation works, all menus are ok but no sound in the car... What's going on?? Could you help me! please!!!! Thanks a lot! Sincerely Vinz =)
  7. I don't think that's possible because AV basically needs video input for screen display!
  8. Ok that's nice!!! Thanks for information!!!
  9. Thanks!!! I hope it won't cancel my bypass!
  10. I need this wire for installed my original bluetooth which needs to mute the unit...
  11. Hi guys, I've installed an AVIC-D3 in my '07 ALFA ROMEO which is equipped of BLUE&ME (bluetooth and usb glove box)! Unfortunately, those functions aren't recovered... But they still work!!!!!!!! The problem is that the car-connector (for BLUE&ME) is not used buy the harness! So I'd like to know if it's possible to hacks IP-BUS and RCA connectors to recover bluetooth and USB!!! I've looked at these diagrams... http://www.lelectronique.com/forum-electronique/attachment.php?attachmentid=1323&d=1344936268 C2 (bluetooth) and C3 (USB) connectors come from the car! I thou
  12. Hi guys, I'd like to know how to use the original mute wire with my D3 which is bypassed (grounded and moved mute wire)? Can I put a new wire in the original mute position? Won't it cancel my bypass? Thanks a lot!!! A+
×
×
  • Create New...