Jump to content
AVIC411.com

mhyde71

Members
  • Content Count

    46
  • Joined

  • Last visited

About mhyde71

  • Rank
    Member

Profile Information

  • Location
    Brattleboro, VT
  • Interests
    Music, Technology & Learning

Contact Methods

  • Yahoo
    mhyde71@yahoo.com
  1. firmware didnt take... it ended up not being a problem after about 2-3 days...was good for a cweekor so,then back to not working again I think it is the ribbon cable perhaps, ie maybe loose connection, or cracked wire in ribbon causing it to go in/out from time totime....also notice if it is over 40* it has no trouble- so could very well be the ribbon or some connection thereof mat
  2. why cant i see any pic's??? might you be able to send to me directly to my email?? mhyde_16@hotmail.com Super big please and thank you matthew
  3. doing a firmware update- will that put me in a position where i will not be able to take advantage of the ducati lockout device...or IOW will it become inoperable? pls advise. matt
  4. okay so it appears now that i am having simliar issue... it started last weekend with the inability to use the hard keys on the bottom nor the touch screen.... but it would fade in/out... after a while i would be able to, but then it would almost go immediately back to being inoperable.,.. Stuff like the map screen just shooting off in a westward direction all by itself... and/or when trying to enter an address it would select various numbers or selections all by itself... kinda like someone was touching the screen. At any rate, now i am at the point where there is an address in th
  5. okay update/correction... I WAS wrong I can not open face to remove/replace CD's - thought i could but no go!
  6. not sure if this makes a difference or not... but i am still able to open the face/screen by hitting the button on the left to insert/eject cd's... that still works fine... it is the booting up and shutting down that the screen has no outward or inward motion going on... Again, not sure if that makes a difference, just wanted to make mention that I can still load/unload CD's w/o any trouble. pls thx matt
  7. any updates abhout this or maybe where you might be able to point me in the direction of other posts/threads about this. I have same exact unit (flashing headligths, bought in june of '06, etc) and for me it seemed to happen in the hotter months of summer (never happened in winter or fall) so i thought maybe a humidity issue. Well, there was a time that it would do it (well, not do it (slide out)) for about a day or so... then next day, after it cooled down overnight and in morning it would pop out like, as you said, it was 2006 all over again. BUT i am now dealing with it not sliding ou
  8. the eq will affect the sub woofer freq's if you adjust the sliders/freq's that correspond to the sub's outputs. Where ever it is that you have the low pass crossed at, i.e. 80hz, then any eq slider that affects 80hz and below will affect the sub's output. the other eq sliders/freq's, (80hz on up) will afftct the cabin speakers. It all depends on where you cross your freq's at that will determine which freq's/sliders will affect which speakers. hope i made sense with that...
  9. okay cool just checking in.. curious to know how well it works for you... One thing I would like to mention as well which might even be easier for you.. is some higher end RCA cables, they have a "drain wire" already attached.. does same thing as you're/we're doing/done but manufactured that way... maybe google or ebay search for rca drain wire will pull up a few.. I know some of the Monster cables have the drain wire... Matt here is a sample.. but i would be concerned with the quality of this cable but it gives you the idea: http://cgi.ebay.com/AVW150-5-16-FT-DUAL-RCA-MALE-CABLE-W-EAR
  10. just to add .. doing all 4 is, IMHO, overkill as the ground is common in all rca out(s), so doing one is all you would need.. It really should be done behind HU, and maybe even grounded to HU... I only say this b/c that's what worked for me.. you might be able to get an idea of how well it might work by doing the procedure at the end of where the amps are first, i.e. take the rca and do the procudure at the end of where one of the amps are and ground the rca in the back to the chassis or something ...see kinda like a preliminary test result..
  11. Yup then, that would be all you need to do... some say that doing all 4 is neccessary, but i found doing just one was the resolve for me. Whine Gone... One other thing.. be mindfull of the gains on amps.. If i turn my gains all way up, or even like 80%.. I do get the whine back.. as it is an input gain it will increas anything in the signal input.. so by grounding the rca and maybe tweaking the gain down to 50/40% then I bet you'lll have no more whine.
  12. I did it to just one.. Now for me it worked b/c the rca's I used are hooked up to amps and stuff ... Not sure what to say/thijnk if you do not have amps hooked up. Do you have amps in you system and stuff?? or are you running speakers right of the HU itself??
  13. Here is a picture of me wrapping a wire around the rca end I spoke of above.. Somewhat rudementary, but maybe give you the idea of what we're referring to... Opposite end of small wire goes to grouning point.. some say not to the HU, and/but I have mine to the HU and it works just fine.. go figure.. Then tape it up real good, making sure no wires are crossed/touching the center positive terminal etc.. and then once taped up through a cable tie on it MH
  14. Awfully interesting.. I'm interested in the HD DAC .. just need to figure out a few things with my Z1 first, so I am keeping an eye on this thread.. good work, thanks!
×
×
  • Create New...