Jump to content
AVIC411.com

ricktnt

Members
  • Content Count

    13
  • Joined

  • Last visited

About ricktnt

  • Rank

  1. Thanks for the map updates. The CardInfo file did not work when trying to update the first time so I simply swapped it out with the CardInfo file that I used when I updated to the 2012 maps and viola, success. As soon as I put the micro sd card in X930BT unit it picked it up and asked me if I wanted to update and 20 minutes later the homescreen logo changed from 2012 to 2013. Thanks again for an awesome share.
  2. Success!!!!!!!! I have finally updated my GPS unit. Big thanks Pionara for all your help and support. Also thanks to Condi and all those involved with making this possible for the members of this site.
  3. So I checked my files early this morning and USER\PRG.FLG is present. I have successfully updated to 3.001. I take it this means that I am to make a copy of the RenewalIFLib.dll file from PRG1 and only edit this file in Winhex - I do not have to do anything to the RenewalIFLib.dll file in PRG0. Afterwards load the single edited file from the PRG1 folder on to the root of an SD card with Condi's replacer program and stick it into the unit to update and then follow the rest of the steps accordingly? If I missed anything, please let me know. Thanks again pionara.
  4. So I have successfully backed up all the files on my unit ..... a mistake I do not plan on making in the future. It's late now and I'm going to stop working on this for the night but I would like to know if I have to edit both RenewalIFLib.dll files - one in PRG0 and PRG1 and what is a good hex editing progam to use in order to edit line 1C30 from 05 00 A0 E1 to 00 00 A0 E3. Once that is done do I save one or both edited files on the root of an SD card along with Condi's replacer program. Pionara can you please let me know if I am on the right track.....don't want to make any mista
  5. Guess my last question for you Pionara is do you want to guide me through the upgrade process. I know these are the steps to follow: The part I am most concerned about is saving the original RenewalIFLib.dll and then editing it. Specifically what hex editor program should I use and where can I find it. Currently I have Winhex installed on my computer. Any suggestions will be greatly appreciated.
  6. Pionara you are a genuis bud!!!!!!!!!!!! Thank you so much. I have been able to successfully restore my unit so that the GPS works and the music videos are playing again. I downloaded the Pioneer update specific to my model navigation system and unzipped the file. Loaded the file just as it was extracted onto the root of the SD card. I downloaded your testmode key. As soon as I started the car with the SD card inserted, it began to automatically update on its own and everything was right again. Thank you so much.
  7. Dumb question.....where do i find a testmode key that is not scripting Just want to make sure I am doing this correctly
  8. I had previously installed condi's hack mode on my unit. When I used Condi's replacer with the renewal.dll file from the pioneer site it replaced the files. However when I restarted the unit it stayed stuck on the Pioneer homepage so that did not work. On a side note, on the weekend I had installed condi's hack mode and it told me that the AV.exe was missing and needed to be installed. Since replacing the renewal.dll files did not get my GPS up and running I decided it would be best to manually install the files missing. I used another SD card with the super test mode key and the fi
  9. So I loaded the RenewalIFLib from Pioneer's official 3.01 update to the root on an SD card along with Condi's RenewallFLip-AutoReplacer 2.1 and it loaded successfully. After I restarted the car the unit went back to the Pioneer home screen and it would not load past that page. There was only one RenewallFLb file that I loaded onto the SD card - not sure if that is an issue. Apparently I am missing the AV.exe file as well. I decided to load both the AV.exe file and the RenewalIFLib from the 3.01 update onto and SD card along with test key. When in test mode I was successfully able to
  10. First off, thanks pionara for trying to help me out. I really appreciate it. I remember there were two back up files that were saved on the SD card after running Condi's RenewallFLip-AutoReplacer 2.1 and I saved them on my external hard drive. After work I will post the date and size of them. I have used Condi's RenewallFLip-AutoReplacer 2.1 a few times on my unit but I only saved the back up files once so I am not sure if they are the original.....is there any way of me checking/knowing if this is the original files. If these are the original files, do I then save both - RenewalIFLib_
  11. You know what pionara I have been reading so many posts under different topics that I am not sure which thread I downloaded the renewaliflib.dll from. Do you think this may be causing my issue. Want to know where I can find the proper renewaliflib.dll for a 3.x version because I am scared that I have compromised the integrity of my original renewaliflib.dll by replacing it with one that is not intended for the 3.x version
  12. Thanks for the response pionara. Will definitely start up a discussion in the Condi's RenewallFLip-AutoReplacer 2.1 forum. Before I do so, I just wanted to get some opinions on the next steps that I should take. I was wondering if I should attempt manually replacing the edited RenewallFLib.dll in test mode to see if that makes a difference or do you think it is wise to attempt reloading the original files to the AVIC unit providing I get my hands on the back up files
  13. Hi guys, I am new to the community but there is a lot of great stuff on this site. I tried upgrading my Pioneer AVIC-X930BT US model navigation system @ 3.00.00 firmware and it has not gone well. Currently my system is only booting to the Pioneer home screen and music off of my CD is playing but it will not load to the GPS. Unfortunately I did not back up my files before attempting this upgrade. First, I was wondering if anyone has a back up of the User files for this system that they can possibly upload or direct me to a link whereby I can download the files and get my system runni
×
×
  • Create New...