B33R

yes,yes it is

Ah, good to know. Business should pick up for you now that an update is out

Nice, missed 2011 update, about time to apply the 2012 Link for step by step instructions (Acronis True Image Home)

Wanted to add the helpful PDF file as I did not see it above, and had to dig it up in some of the older posts. This helps reduce the pucker factor when imaging your drive. How to Upgrade AVIC-Z.pdf

So awesome, you guys rule, this will be the third straight year I update to the latest maps for free

Maybe Garrett will post the drive image with the map update installed and save us all 120 bux I personally like the newsgroup idea w/supporting .nzb for hosting but might be too high tech for some...

Sweet, I got it fixed and it is working as expected. The wire tap to the reverse wire came loose!

Ok, I can do that. From my understanding the only backup view you can use while driving is the split screen the map menu. To go full screen like when in reverse you need to run a switch, or is this mode that also be enabled from HU?

I installed the boyo backup camera last night on a Z2, but I am confused on a few things. The connections to the camera are RCA Video, Power and Ground. I got all of them connected except the power wire for the camer. Do I connect the power cable from the backup cam to the reverse wire of the avic that is already tapped to the truck or just to a 12 v source? Anyone help? I have searched for this topic but cannot find it. Thanks! B33R BTW: '07 Tacoma

The order does not matter pmason. If you do not have the 2 wire mod completed you will need to engage your parking brake in order to enable the "yes" button for the software update to begin. I had the software installed first then did the 2 wire mod. After the mod I simply needed to reboot my z2 and it was all good. Drove a couple more hundred miles last weekend and it still working 100%. Good luck!

I have been trolling this board for about a week as I got my AVIC-Z2 installed around then. I fell into a big bucket of $hit as I stumbled onto this thread and have been following it since page 1. I installed the ISO and it worked the first time, which was very easy. Just use Nero to burn the image. Oh, and for all that get errors during the upgrade, try lowering the burn speed of your CD burner! I then completed the 2 wired mod last night but it still threw the parking brake msg. So I tore it apart again today and notice that the "mute" wire was not pushed all the way up into the wiring harne