Hi guys, looking for help on an old f60dab.
Sorry it's a bit of a long post but here's what happened so far...
I realise most users here have moved on, as I once did. I hope someone may be left who can throw some advice my way. But at the very least pls read this as a warning.
After screwing up a good mates 8 year old f60dab by failed updating? I have gone through many of the old posts of days gone by to try and remember what to do. I also tried to download relevant files to assist but sadly nearly all links dead or fail to download. I keep trying.
However with my mate screaming at me, I resorted to contacting pioneer service dept. and was sent to their UK service company Dtronix, Milton Keynes. A £39 assessment fee, plus my postage there and £18.00 back. Around £70 UKpounds in all.
They do have a well organised booking system.
After a few days they sent me a link to the description & quote for repair. (If you're considering this, sit down before reading!)
For a 'liquid contaminated display' repair (buttons stopped working after the failed update)
Reconnect internal ribbon cable, possibly me when I had to retrieve sd card behind screen.
REPLACE s.o.c main board, as it fails to boot and is 'dead'
£690.00 UKpounds + vat (tax) That's not a typo, SIX HUNDRED, NINETY UKPounds
They did recommend it was not economical to repair - no sh1t !!
I declined the work and had the unit returned. Now i don't know much about coding or hacking but I was an electronic technician in a research dept. of a local University for many years.
So i stripped the unit down to asses the 'liquid contamination / damage' and see about repair. And as expected, not a damn thing wrong with any of it. Using a good microscope I examined every ribbon flex, pcb flex and connector. The touch screen, button flex and controller all perfect, if just a bit dusty.
So I spoke to service dept again at Pioneer UK and mentioned my concern & findings. I also asked why they couldn't re-flash the main board or provide necessary files. They said they would look into it but just emailed me a copy of the D-tronix report.
So a costly pointless waste of time. And confirmation if any needed, Pioneer UK don't care about customers or offer any support themselves. After that I personally wouldnt trust dtronix to re-string my washing line. Lazy money grabbing lying crooks !
In the meantime, I still have the unit 'bare'. There is no internal sdcard on this model and although buttons light up still they dont work, so no way to open display to insert a sdcard in the normal slot if needed.
I have tried with usb stick in the usb ports using goldenapple.tst that had been uploaded by asd255 / spectrax -but no effect.
But as this is a touch screen unit how can there be a button combination to press that there is with knob units?
Not sure if correct, I tried several times to download platform x000 Avic Fx60 EU FW-115.zip by asd255 but these links are now several years old and don't work.
So I just don't no what else to do now. But as this once great forum is still here, maybe one day someone will find this and offer suggestions.
