i just got the avic d3 in the mail today all for 530 shipped, very happy!

and i read like for 1 week on how to do the bypass, i got the mute wire onto the top slot to bypass no problem.

i'm pretty good at installing hardware things etc.

before i install this 2moro.

but instructions all say to ground the mute wire. which im not 100% sure how. if anyone can explain step by step how to ground the mute wire, it be very helpful.

thanks again. this forum has been very helpful in makin my decision to purchase this system a breeze.

I'm not sure what you mean by "good at installing hardware things" if you don't know how to ground something, but basically, you just have to connect the mute wire to a part of the car's metal chassis, or you can just tap into the ground from the D3's wire harness.

Find a bolt or screw going into a metal part of the car. Attach the mute wire and parking brake wire to it.

I grounded it into the main ground on the harness and it works fine. Easy to do, and can be done in the house b4 you even go outside.

Stop messing with the guy. Grounding it means you need to connect the relocated mute wire and P brake wire to a 6 inch piece of steel. Drill a hole in the floor and let the steel touch the ground. The steel usually will last 4-6 months depending on road surface.

Good Luck!

Stop messing with the guy. Grounding it means you need to connect the relocated mute wire and P brake wire to a 6 inch piece of steel. Drill a hole in the floor and let the steel touch the ground. The steel usually will last 4-6 months depending on road surface.

 

Good Luck!

Don't forget to seal your hole with silicone. You don't want any water leaks, do you?

I'm not sure what you mean by "good at installing hardware things" if you don't know how to ground something