so i tried setting up my phone book....connected my phone, registered it, then went to the add phonebook and it didnt say anything on that screen, after reading the manual i guess it should say start? i know that a lot of phones wont do the transfer so im just wondering if this is how its supposed to happen whenever you dont have the option of transfering the phone book....its kind of an older Razor..verizon..

Second thing, my plan is up and i get a 2 year upgrade, i want a phone that will connect well with my D3...i read through the poll where they list there phone, phone carrier and the options it does but i was wondering first, whats the best phone for verizon to connect with my D3 also is there a certain type of brand LG, Motorola or something that does better or worse with the D3 bluetooth connection?

Thanks for all the info in advance!

Yeah the manual's wrong.

Once you start the process, you won't see a "start" button. Just have your phone beam the contacts and it'll work.

Hey holee,

I am having the same problem with my HTC 8125 from Cingular. Not only I am not able to see the contacts I am not able to add using the phonebook. I am guessing I can create the names and numbers of people and store them on the BT 200 but I am not able to do that using the avic display. So far the only thing that I was able to do is to go to the received calls and get the numbers into the Preset dials but it only shows the number not the name. The Caller ID with the name is not being transferred from the phone to the unit. I am using the jetware demo version on my phone. Will the complete ver help me resolve my problem?

Thank you for your help

CC

Make sure to register the phone in position #1 before trying to transfer the phone book

Just set mine up yesterday. The phone functions work well but my BBerry contacts are not uploading. I have >1200 contacts...is it as simple as reducing to <500 contacts?

Thanks in advance.

Sean

I have the phone registered in position one. I do a direct connect and the go to the menu to do the phonebook upload and it disconnects the phone but it doen't add the contacts. I also tried the same with my wife Motorolas and it does the same thing. I am interested only on having the contacts from my 8125 on it. HELP!!!

It is supposed to disconnect when you hit phonebook transfer. Then you use your phone and select a contact to send over. Choose one and hit the menu button on your phone. It should have an option similar to Send Address Book Entry, or Copy, or Send Business Card, or something like that. Repeat that for all your address book entries

Thank you i will try it that way and report back.

I couldn't wait so I took a break and went to my car to play with my new radio. And it works!!!! I do not have that many contacts so for me to do it manually is not big deal. I am extremelly happy with the radio. I have a step by step of my install with pics and everything for a 2005 Xterra that I think will help some people. I will create a new post for it. Thank you all for your help here.

Thank you

Carlos Cameselle

The phone software itself doesent add the contacts. You must do the following steps to transfer the entire phone book at one time....

On the Tilt I went to program files then to the bluetooth options folder. thats were the Jetware program is (on mine its labled hands free config). Go to menu and then phonebook options. In the phonebook options go to menu again and there is a send contacts item. Make sure your d3 is ready to transfer phonebook then click done on the phone and it should send everything over.

Should be exactly the same for the 8125...

Ive had both phones so im pretty confident of that.

Ok one last thing that I just noticed. When I receive a call the radio is not showing the name of the caller. Even thought the number is in the phonebook. The only Diference is that in the phone I have a "-" between the number IE (305)123-4567.

Thank you in advanced for your help

Carlos

If the phone number was trasfered over to the btb phonebook then it should show up. I dont think that there is any issue with the dash in the number but on occasion I have been known to be absolutly wrong. I would change a couple of the number to without the dash or any other figures and see if it makes a difference.

Could it be that I am not using the full version of the jetware software?

Thank you

CC

No the full version and trial version work exactly the same. The only difference is the trial version is only a 30 day trial.

ok I have to report that it was the dash and the way that entering the contacts in the 8125 phone book. If you enter the number using the keypad it works fine.

Do the following.

Press the Green button like if you were to make a call.

You will get the number keypad on the screen.

Enter the number that you wanna save IE: 3051234567 just like that.

Hit menu on the bottom right

Hit save to contacts. (notice that the number does not have spaces or dashes on it)

Give the contac a name and hit OK on the top corner and you are done with the creation of contact part.

Not do the rest Upload contac to the BTB-200 and you are set.

Again THANK YOU to all of you that help me during the setup and install

Carlos Cameselle

I cant even get the settings button or many others to light up to allow for setting the phone. Did I miss a wire or something since they are dimmed out? Cant even set clock.

You need to either usen the emergency break if you connected that wire from the radio or you need to check your ground.

I have my radio hacked so I can use the Nav while driving. You do not have to hack the radio if you do not want to, but the Brake wire (lime green) needs to be connected. Then if you do that you will need to stop the car and put on the emergency break to use those functions. If you want to know how to hack the system so you can use it while driving then take a look at this post. http://www.avic411.com/forum/viewtopic.php?t=12693