Okay, I did a search, but didnt find what I was looking for.

I had my Z1 installed in my G35 and everything worked perfect. Navigation NEVER gave me any problems at all. Well, It was uninstalled from the G and reinstalled in my new Cobra. Now that it is in the cobra, the navigation arrow never points in the right direction.

I paid to have it installed but I went to a place because of "word of mouth" and I dont trust the guy to fix it. He didnt hook up the dimmer, speed sensor, XM, or the bypass.

I guess my question is, is there anything I can do about the navigation arrow, like some sort of reset or calibration or is it caused by his error of installation?

Thanks

c'mon...Anyone? This is really annoying(the navi problem that is...)

c'mon...Anyone? This is really annoying(the navi problem that is...)

You could try a complete reset... (Instructions in the manual), or just reset the calbration data first in the hardware menu...

from the manual:

To clear values...

If you want to delete the learned results stored in

[Distance], [speed Pulse] or [Learning Status],

touch the relevant result, then touch [Yes].

❒ If you select [Learning Status], you can

select [Reset All] or [Reset Distance

Study]. To clear all learning statuses, touch

[Reset All]. To clear only the Distance study,

touch [Reset Distance Study].

❒ Touch [Reset All] for the following cases:

• When you changed the installation position

of the navigation system

• When you changed the installation angle of

the navigation system

• When you moved the navigation system to

another vehicle❒ When the distance accuracy is low, touch

[Reset Distance Study].

❒ Touching [Reset All] returns the installation

angle setting also to the default or factory setting.

Reconfigure the setting.

For hardware reset, see manual page 159:

click:manual