Hi/:)

I tried to install European Firmware on my Avic (cause i need even FM frequency).

So, everything was ok, but after changing firmware - nothing changed with fm radio. Still only 98,1 - 98,3 -98,5 etc.

I decided to return back original firmware (a back up it on usb), after copying and rebooting - avic doesn't want to start.

When i turn it on - a see Pioneer logo for about 15 seconds, and after that it turs off/:evil:

The same problem if i start SD card with testmode - so i even can't run testmode and change firmware.

So i really don't know what to do.

excuse my english

Still need help

How to install new firmware without testmode? I have already download it.

Or maybe it is possible to connect PC via USB, and PC will see the avic as usb device so i can upload new firmware?

Nowbody had such problems?

bump, need help

sorry... can;t help here.

Just wondering if you checked for the extra button on the AV settings screen?

There should be a button there making .100 increments happen.

Also... why did you change back to US firmware if all remained the same?

sorry... can;t help here.

 

Just wondering if you checked for the extra button on the AV settings screen?

There should be a button there making .100 increments happen.

 

Also... why did you change back to US firmware if all remained the same?

i don't understand about button - how can i check it if i even can't turn avic on.

I just tried different firmware, and as there were no difference, decided to return back to may old one, because there were maps, poi's etc

By the way, i guess i will solve this problem if i could connect my avic to PC.

Tried to do it via USB a-a male-male plug, but no results